7000 Series L3 Managed Switch Reference Manual for Software v2.0

config router bootpdhcprelay maxhopcount

This command configures the maximum allowable relay agent hops for BootP/DHCP Relay on the system. The <hops> parameter has a range of 1 to 16.

Default

4

Format

config bootpdhcprelay maxhopcount <1-16>

config router bootpdhcprelay minwaittime

This command configures the minimum wait time in seconds for BootP/DHCP Relay on the system. When the BOOTP relay agent receives a BOOTREQUEST message, it MAY use the seconds-since-client-began-booting field of the request as a factor in deciding whether to relay the request or not. The parameter has a range of 0 to 100 seconds.

Default

0

Format

config bootpdhcprelay minwaittime <0-100>

config router bootpdhcprelay serverip

This command configures the server IP Address for BootP/DHCP Relay on the system. The <ipaddr> parameter is an IP address in a 4-digit dotted decimal format.

Default

0.0.0.0

Format

config bootpdhcprelay serverip <ipaddr>

Routing Commands

8-37

Page 177
Image 177
NETGEAR L3 manual Config router bootpdhcprelay maxhopcount, Config router bootpdhcprelay minwaittime