NETGEAR L3 manual Show vlan detailed, Config vlan detailed vlan id, where the ID is a

7000 Series L3 Managed Switch Reference Manual for Software v2.0

show vlan detailed

This command displays detailed information, including interface information, for a specific VLAN.

Format	config vlan detailed <vlan id>, where the ID is a
	valid VLAN identification number
VLAN ID	There is a VLAN Identifier (VID) associated with each VLAN.
	The range of the VLAN ID is 1 to 4094.
VLAN Name	A string associated with this VLAN as a convenience. It can be
	up to 16 alphanumeric characters long, including blanks. The
	default is blank. VLAN ID 1 always has a name of `Default`. This
	field is optional.
VLAN Type	What type of VLAN this is. A VLAN can be the Default VLAN,
	(VLAN ID = 1), a static VLAN, one that is configured and per-
	manently defined, or a Dynamic VLAN, one that is created by
	GVRP registration. In order to change a VLAN from Dynamic to
	Static, select Static from the Vlan Type pull-down entry field.
	Once the VLAN is selected, click on Submit. This will change the
	VLAN type to Static.
Slot.Port	Indicates by slot id and port number which port is controlled by
	the fields on this line. It is possible to set the parameters for all
	ports by using the selectors on the top line.
Current	Determines the degree of participation of this port in this VLAN.
	The permissible values are:
	Include - This port is always a member of this VLAN. This is
	equivalent to registration fixed in the IEEE 802.1Q standard.
	Exclude - This port is never a member of this VLAN. This is
	equivalent to registration forbidden in the IEEE 802.1Q standard.
	Autodetect - Specifies to allow the port to be dynamically regis-
	tered in this VLAN via GVRP. The port will not participate in this
	VLAN unless a join request is received on this port. This is
	equivalent to registration normal in the IEEE 802.1Q standard.
Configured	Determines the configured degree of participation of this port in
	this VLAN. The permissible values are:
	Include - This port is always a member of this VLAN. This is
	equivalent to registration fixed in the IEEE 802.1Q standard.
	Exclude - This port is never a member of this VLAN. This is
	equivalent to registration forbidden in the IEEE 802.1Q standard.
Switching Commands	7-31