7000 Series L3 Managed Switch Reference Manual for Software v2.0

Default

none

Format

config network protocol <nonebootpdhcp>,

 

where bootp indicates that the switch periodically sends

 

requests to a Bootstrap Protocol (BootP) server or a dhcp server

 

until a response is received. none indicates that the switch

 

should be manually configured with IP information.

config network webmode

This command enables or disables access to the switch through the Web interface. When access is enabled, the user can login to the switch from the Web interface. When access is disabled, the user cannot login to the switch's Web server.

Disabling the Web interface takes effect immediately. All interfaces are effected.

Default

enable

network webmode <enabledisable>

Format

config

config network javamode

This command specifies whether or not the switch should allow access to the Java applet in the header frame of the Web interface. When access is enabled, the Java applet can be viewed from the Web interface. When access is disabled, the user cannot view the Java applet.

Default

enable

network javamode <enabledisable>

Format

config

config prompt

This command changes the name of the prompt. The length of name may be up to 64 alphanumeric characters.

Default

<model

#>

Format

config

prompt <system prompt>

show serial

This command displays serial communication settings for the switch.

Format

show serial

 

 

7-16

Switching Commands

Page 70
Image 70
NETGEAR L3 manual Config network webmode, Config network javamode, Config prompt, Show serial