7000 Series L3 Managed Switch Reference Manual for Software v2.0

Default

disable

Format

config router ospf interface mode

 

<slot.port> <enabledisable>

config router ospf interface priority

This command sets the OSPF priority for the specified router interface. The priority of the interface is a priority integer from 0 to 255.

A value of '0' indicates that the router is not eligible to become the designated router on this network.

Default

1, which is the highest router priority.

Format

config router ospf interface priority

 

<slot.port> <0-255>

config router ospf interface cost

This command configures the cost on an OSPF interface. The <ipaddr> and <slot.port> parameters identify the interface on which to configure the cost. The <cost> parameter has a range of 1 to 65535.

Default

10

Format

config router ospf interface cost <ipaddr> <slot.port

 

> <1-5535>

show router ospf area info

This command displays information about the area. The <areaid> identifies the OSPF area that is being displayed.

Format

show router ospf area info <areaid>

AreaID

Is the area id of the requested OSPF area.

Aging Interval

Is a number representing the aging interval for this area.

External Routing

Is a number representing the external routing capabilities for this

 

area.

Spf Runs

Is the number of times that the intra-area route table has been cal-

 

culated using this area's link-state database.

Area Border Router Count The total number of area border routers reachable within this

 

area.

 

 

8-14

Routing Commands

Page 154
Image 154
NETGEAR L3 manual Config router ospf interface priority, Config router ospf interface cost, Show router ospf area info