7000 Series L3 Managed Switch Reference Manual for Software v2.0

config spanningtree mst vlan remove

This command removes an association between a multiple spanning tree instance and a VLAN. The VLAN will again be associated with the common and internal spanning tree. The instance <mstid> is a number that corresponds to the desired existing multiple spanning tree instance. The <vlan> corresponds to an existing VLAN ID.

Format

config spanningtree mst vlan remove <mstid>

 

<vlan>

config spanningtree mst priority

This command sets the bridge priority for a specific multiple spanning tree instance. The instance <mstid> is a number that corresponds to the desired existing multiple spanning tree instance. The priority <value> is a number within a range of 0 to 61440 in increments of 4096.

Default

32768

Format

config spanningtree mst priority <mstid> <0-

 

61440>

config spanningtree mst port pathcost

This command sets the path cost for a specific port within a multiple spanning tree instance. The instance <mstid> is a number that corresponds to the desired existing multiple spanning tree instance. The <slot.port> is the desired switch port. The pathcost can be specified as a number in the range of 1 to 200000000 or auto. If "auto" is specified, the pathcost value will be set based on Link Speed.

Default

auto

Format

config spanningtree mst port pathcost

 

<mstid> <slot.port> <1-200000000/auto>

config spanningtree mst port priority

This command sets the priority for a specific port within a specific multiple spanning tree instance. The instance <mstid> is a number that corresponds to the desired existing multiple spanning tree instance. The <slot.port> is the desired switch port. The priority <value> is a number in the range of 0 to 240 in increments of 16.

Default128

Switching Commands

7-57

Page 111
Image 111
NETGEAR L3 Config spanningtree mst vlan remove, Config spanningtree mst priority, Config spanningtree mst port pathcost