NETGEAR L3 manual Config dot1x port transmitperiod, Config dot1x port supptimeout

7000 Series L3 Managed Switch Reference Manual for Software v2.0

config dot1x port transmitperiod

This command sets the value, in seconds, of the timer used by the authenticator state machine on the specified port to determine when to send an EAPOL EAP Request/Identity frame to the supplicant. The transmit period must be a value in the range of 1 and 65535.

Default	30
Format	config dot1x port transmitperiod <slot.port>
	<1-65535>

config dot1x port supptimeout

This command sets the value, in seconds, of the timer used by the authenticator state machine on this port to timeout the supplicant. The supplicant timeout must be a value in the range of 1 and 65535.

Default	30
Format	config dot1x port supptimeout<slot.port> <1-65535>

config dot1x port servertimeout

This command sets the value, in seconds, of the timer used by the authenticator on this port to timeout the authentication server. The server timeout must be a value in the range of 1 and 65535.

Default	30
Format	config dot1x port servertimeout <slot.port> <1-65535>

config dot1x port maxrequests

This command sets the maximum number of times the authenticator state machine on this port will retransmit an EAPOL EAP Request/Identity before timing out the supplicant. The max requests value must be in the range of 1 and 10.

Default	2
Format	config dot1x port maxrequests <slot.port> <1-10>

config dot1x port reauthperiod

This command sets the value, in seconds, of the timer used by the authenticator state machine on this port to determine when reauthentication of the supplicant takes place. The reauthperiod must be a value in the range of 1 and 65535.

7-72 Switching Commands