7000 Series L3 Managed Switch Reference Manual for Software v2.0

config protocol interface add

This command adds the physical <slot.port> interface to the protocol-based VLAN identified by <groupid>. If <all> is selected, all physical interfaces will be added to this protocol group. A group may have more than one interface associated with it. Each interface and protocol combination can only be associated with one group. If adding an interface to a group causes any conflicts with protocols currently associated with the group, this command will fail and the interface(s) will not be added to the group.

Default

none

Format

config protocol interface add <groupid> <slot.port/

 

all>

config protocol interface remove

This command removes the <interface> from this protocol-based VLAN group that is identified by this <groupid>. If <all> is selected, all ports will be removed from this protocol group.

Default

none

Format

config protocol interface remove <groupid>

 

<slot.port/all>

show garp info

This command displays Generic Attributes Registration Protocol (GARP) information.

Format

show garp info

GMRP Admin Mode

This displays the administrative mode of GARP Multicast Regis-

 

tration Protocol (GMRP) for the system.

GVRP Admin Mode

This displays the administrative mode of GARP VLAN Registra-

 

tion Protocol (GVRP) for the system.

show garp interface

This command displays Generic Attributes Registration Protocol (GARP) information for one or all interfaces.

Format

show garp interface <slot.port/all>

Interface

This displays the slot.port of the interface that this row in the

 

table describes.

 

 

Switching Commands

7-37

Page 91
Image 91
NETGEAR L3 manual Config protocol interface add, Config protocol interface remove, Show garp info, Show garp interface