7000 Series L3 Managed Switch Reference Manual for Software v2.0

config router ospf area range delete

This command deletes a specified area range.

The <ipaddr> is a valid IP address.

The <subnetmask> is a valid subnet mask.

The parameter [summ] is optional.

Format

config router ospf area range delete

 

<areaid> <ipaddr> <subnetmask> [summ]

config router ospf area stub metric value

This command configures the monetary default metric for the stub area. The operator must specify the area id and an integer value between 1-16777215.

Format

config router ospf area stub metric value

 

<areaid> <1-16777215>

config router ospf area stub metric type

This command configures the type metric for the stub area. The operator must specify the area id and a type.

Valid types are:

metric - Area Internal OSPF metric

 

comparable - External Type 1 metrics (comparable to the link

 

state metric)

 

noncomparable - External Type 2 metrics (are assumed to be

 

larger than the cost of the link state metric)

Format

config router ospf area stub metric type

 

<areaid> <metriccomparablenoncomparable>

config router ospf area stub summarylsa

This command configures the Summary LSA mode for the stub area identified by <areaid>. The Summary LSA mode can be configured as enabled or disabled.

Format

config router ospf area stub summarylsa

 

<areaid> <enable/disable>

 

 

8-16

Routing Commands

Page 156
Image 156
NETGEAR L3 manual Config router ospf area range delete, Config router ospf area stub metric value