7000 Series L3 Managed Switch Reference Manual for Software v2.0

show radius summary

This command displays the following RADIUS configuration items for the switch.

Format

show radius summary

Current Server

The IP address of the server currently used for authentication.

IP address

Number of Configured

ServersThe number of RADIUS servers that have been configured. This

value will be in the range of 0 and 3.

Max Number of Retransmits The configured value of the maximum number of times a request packet is retransmitted.

Timeout Duration

The configured timeout value, in seconds, for request retransmis-

 

sions.

Accounting Mode

The configured value for RADIUS accounting mode indicating if

 

accounting is cur-rently enabled.

show radius server summary

This command displays the configured RADIUS servers.

Format

show radius server summary

Current

Indicates the configured server currently in use for authentication

IP address The configured IP address of the authentication server

Port The port in use by this server

Type Primary or Secondary

Secret Configured

Yes or No

show radius server stats

This command displays the statistics for a configured RADIUS server. The IP address specified must match the IP address of a configured RADIUS server.

Format

show radius server stats <ipaddr>

Server IP address

The IP address of the RADIUS server

Switching Commands

7-67

Page 121
Image 121
NETGEAR L3 manual Show radius summary, Show radius server summary, Show radius server stats, Secret Configured