7000 Series L3 Managed Switch Reference Manual for Software v2.0

show radius stats

This command displays the RADIUS statistics that are not related to a specific server or to the accounting server.

Format

show radius stats

Invalid Server Addresses

The number of RADIUS Access-Response packets received from

 

unknown addresses.

clear radius stats

This command clears all RADIUS statistics.

Format

clear radius stats

config dot1x adminmode

This command enables or disables authentication support on the switch. The default value is disable. While disabled, the dot1x configuration is retained and can be changed, but it is not activated.

Default

disable

Format

config dot1x adminmode <enable/disable>

config dot1x port initialize

This command begins the initialization sequence on the specified port. This command is only valid if dot1x is enabled and the control mode for the specified port is ‘auto’.

Format

config dot1x port initialize <slot.port>

config dot1x port reauthenticate

This command begins the reauthentication sequence on the specified port. This command is only valid if dot1x is enabled and the control mode for the specified port is ‘auto’.

Format

config dot1x port reauthenticate <slot.port>

7-70

Switching Commands

Page 124
Image 124
NETGEAR L3 manual Show radius stats, Clear radius stats, Config dot1x adminmode, Config dot1x port initialize