7000 Series L3 Managed Switch Reference Manual for Software v2.0

 

 

Format

config diffserv policy bandwidth percent <policyname>

 

<classname> <1-100>

Restrictions

The sum of the committed information rate values for all band-

 

width and expedite commands defined within a policy must not

 

exceed the available link bandwidth of the interface to which that

 

policy is assigned. Violation of this requirement shall prevent

 

successful attachment of a policy to the interface, or shall cause

 

this command to fail if the policy is already in service on one or

 

more interfaces.

Policy Type

Out

Incompatibilities

Expedite (all forms)

config diffserv policy expedite kbps

This command identifies the maximum guaranteed amount of bandwidth to be reserved for the specified class instance within the named policy using an absolute rate notation. The <policyname> and <classname> are the names of an existing DiffServ policy and class, respectively. The committed information rate is specified in kilobits-per-second (Kbps) and is an integer from 1 to 4294967295. The optional committed burst size is specified in kilobytes (KB) as an integer from 1 to 128, with a default of 4.

Note: The actual bandwidth allocation does not occur until the policy is attached to an interface in a particular direction.

Note: The expedite kbps and percent commands are alternative ways to specify the same expedite policy attribute.

Format

config diffserv policy expedite kbps <policyname>

 

 

<classname> <1-4294967295> [1-128]

 

Restrictions

The sum of the committed information rate values for all band-

 

width and expedite commands defined within a policy must not

 

exceed the available link bandwidth of the interface to which that

 

policy is assigned. Violation of this requirement shall prevent

 

successful attachment of a policy to the interface, or shall cause

 

this command to fail if the policy is already in service on one or

 

more interfaces.

 

Policy Type

Out

 

Incompatibilities

Bandwidth (all forms), Shape Peak

 

 

 

CLI Commands: Differentiated Services

9-17

Page 195
Image 195
NETGEAR L3 manual Config diffserv policy expedite kbps, Bandwidth all forms, Shape Peak