NETGEAR L3 manual Transfer upload filename, Transfer upload datatype

7000 Series L3 Managed Switch Reference Manual for Software v2.0

See the example of the path setup.

TFTP Upload Example:

The TFTP upload example details three scenarios for TFTP client to server file transfer.

In the example, the operator will upload the config.bin file from the switch to the location c:\tftp\ on the server. The different scenarios are detailed below:

Table 3. TFTP Upload Example.

TFTP Server path	TFTP Client path
c:\tftp\	blank
c:\	tftp\
c:	\tftp\

7000 Series L3 Managed Switch Software provides two methods to clear the directory path statement.

•The clear config command will remove the directory path statement.

•The web browser clear command will remove the directory path statement.

Default	Blank
Format	transfer upload path <path>

transfer upload filename

This command sets the name for the file that is uploaded from the switch. The switch “remembers” the last file name used.

Append the file path to the file name if the string is less than 31 characters. Otherwise, use the “transfer upload path” command, and the File Name will be appended to the File Path.

Note: This command is valid only when the Transfer Mode is TFTP. See“transfer upload mode” .

Default	Blank
Format	transfer upload filename <name>

transfer upload datatype

This command sets the type of file to upload from the switch.

Switching Commands 7-81