Chapter 4

Web-Based Management Interface

Your NETGEAR GSM73xx Level 3 Managed Switch Software v2 provides a built-in browser interface that lets you configure and manage it remotely using a standard Web browser such as Microsoft Internet Explorer 5.0 or later or Netscape Navigator 6.0 or later.

This interface also allows for system monitoring and management of the switch. The ‘help’ page will cover many of the basic functions and features of the switch and it’s web interface.

When you configure the switch for the first time from the console, you can assign an IP address and subnet mask to the switch. Thereafter, you can access the switch’s Web interface directly using your Web browser by entering the switch’s IP address into the address bar. In this way, you can use your Web browser to manage the switch from a central location, just as if you were directly connected to the switch’s console port. Figure 4-1 shows this management method.

Figure 4-1: Web Management Method

The 6 menu options available are: System, Status, Set-up, Tools, Security, and Advanced. There is a help menu in the top of right side of screen; you can click the ‘help’ or the question mark to read the help menu.

The help menu contains:

 

 

Web-Based Management

Introduction to the Web management features.

 

Device Management

Introduction of the basic icons and management of the device

 

Interface Operations

Describes Web browser requirements, and common commands

 

 

Web-Based Management Interface

4-1

Page 31
Image 31
NETGEAR L3 manual Chapter Web-Based Management Interface