![](/images/backgrounds/202207/bg2e.png)
Troubleshooting
40
Computer/connectivity problemsYou cannot take
a picture
■Turn the camera off, then on again.
■Press the Shutter button all the way (page8).
■Battery is exhausted. Recharge the battery or insert a new
one (page2).
■Wait until the ready light is green before attempting to
take another picture.
■Transfer pictures to the computer (page37), delete
pictures from the camera (page25), switch image-storage
locations (page19), or insert a card with available
memory (page7).
Picture orientation is
not accurate
■Set the Orientation Sensor (page 21).
Flash does not fire ■Check flash setting, and change as needed (page14).
Battery life is short ■Recharge the battery fully or insert a new one (page2).
Camera displays an
error code
■Press the Shutter button all the way (page8).
■Battery is exhausted. Recharge the battery fully (page2).
■Wait until the ready light is green before attempting to
take another picture.
■Transfer pictures to the computer (page37), delete
pictures from the camera (page25), switch image-storage
locations (page19), or insert a card with available
memory (page7).
■Contact your local service provider or visit
www.kodak.com/go/support.
If... Try one or more of the following
The computer does
not communicate with
the camera
■Turn on the camera.
■Recharge the battery or insert a new one (page2).
■Make sure USB cable is securely connected on camera and
computer port (page37).
■Try another USB port on the computer.
■Make sure the EasyShare software is installed (page31).
■See the EasyShare software Help.
If... Try one or more of the following