7000 Series L3 Managed Switch Reference Manual for Software v2.0

Designated Port Identifier Port on the Designated Bridge that offers the lowest cost to the

LAN

show spanningtree vlan

This command displays the association between a VLAN and a multiple spanning tree instance. The <vlan> corresponds to an existing VLAN ID.

Format

show spanningtree vlan <vlan>

VLAN Identifier

 

Associated Instance

Identifier for the associated multiple spanning tree instance or

 

"CST" if associated with the common and internal spanning tree

User Account Management Commands

These commands manage user accounts.

show users

This command displays the configured user names and their settings. This command is only available for users with readwrite privileges. The SNMPv3 fields will only be displayed if SNMP is available on the system.

Format

show users

User Name

The name the user will use to login using the serial port, Telnet or

 

Web. A new user may be added to the switch by entering a name

 

in a blank entry. The user name may be up to 8 characters, and is

 

not case sensitive. Two users are included as the factory default,

 

admin and guest

Access Mode

Shows whether the operator is able to change parameters on the

 

switch(Read/Write) or is only able to view them(Read Only). As

 

a factory default, admin has Read/Write access and guest has

 

Read Only access. There can only be one Read/Write user and up

 

to 5 Read Only users.

SNMPv3 AccessMode

This field displays the SNMPv3 Access Mode. If the value is set

 

to ReadWrite, the SNMPv3 user will be able to set and retrieve

 

parameters on the system. If the value is set to ReadOnly, the

 

SNMPv3 user will only be able to retrieve parameter information.

 

 

7-60

Switching Commands

Page 114
Image 114
NETGEAR L3 manual User Account Management Commands, Show users, Show spanningtree vlan vlan