7000 Series L3 Managed Switch Reference Manual for Software v2.0
8-2 Routing Commands
Type Is the type that was configured into the unit. The possible values
are Local, Gateway, Dynamic and Static.
config arp agetime
This command configures the ARP entry ageout time.
The value for <seconds> is a valid positive integer, which represents the IP ARP entry ageout time
in seconds. The range for <seconds> is between 15-3600 seconds.
Default 1200
Format config arp agetime <15-3600seconds>
config arp cachesize
This command configures the ARP cache size. The value for <cachesize> is a positive integer
between 10-128.
Format config arp cachesize <10-128>
config arp create
This command creates an ARP entry.
The value for <arpentry> is the IP address of the interface. <macaddr> is a unicast MAC address
for which the switch has forwarding and/or filtering information.
The format is 6 two-digit hexadecimal numbers that are separated by colons, for example
00:06:29:32:81:40.
Format config arp create <arpentry> <macaddr>
config arp delete
This command deletes an ARP entry. The value for <arpentry> is the IP address of the interface.
Format config arp delete <arpentry>
config arp resptime
This command configures the ARP request response timeout.