7000 Series L3 Managed Switch Reference Manual for Software v2.0

Format

config mirroring create <slot.port>

 

<slot.port>

config mirroring delete

This command removes the port mirroring designation from both the probe port and the mirrored port and removes the probe port from all VLANs. The port must be manually re-added to any desired VLANs.

Format

config mirroring delete

config mirroring mode

This command configures the Port Mirroring mode. The possible values are enable and disable. The default value is disable. The probe and mirrored ports must be configured before port mirroring can be enabled. If enabled, the probe port will mirror all traffic received and transmitted on the physical mirrored port. It is not necessary to disable port mirroring before modifying the probe and mirrored ports.

Default

disable

Format

config mirroring mode <enabledisable>

show macfilter

This command displays the Static MAC Filtering information for all Static MAC Filters. If <all> is selected, all the Static MAC Filters in the system are displayed. If a macaddr is entered, a vlan must also be entered and the Static MAC Filter information will be displayed only for that MAC address and VLAN.

Format

show macfilter <macaddr vlan/all>

MAC Address

Is the MAC Address of the static MAC filter entry.

VLAN ID

Is the VLAN ID of the static MAC filter entry.

Source Port(s)

Indicates the source port filter set's slot and port(s).

Destination Port(s)

Indicates the destination port filter set's slot and port(s).

7-46

Switching Commands

Page 100
Image 100
NETGEAR L3 manual Config mirroring delete, Config mirroring mode, Show macfilter