NETGEAR L3 manual Config router vrrp interface ipaddress, Config router vrrp interface preemptmode

7000 Series L3 Managed Switch Reference Manual for Software v2.0

config router vrrp interface ipaddress

This command sets the ipaddress value for a virtual router. The value for <ipaddr> is the IP Address which is to be configured on that interface for VRRP. The parameter <vrID> is the virtual router ID which has an integer value range from 1 to 255.

Default	There is no default value for ipaddress.
Format	config router vrrp interface ipaddress
	<slot.port> <vrID> <ipaddr>

config router vrrp interface preemptmode

This command sets the preemption mode value for the virtual router configured on a specified interface. The parameter <vrID> is the virtual router ID which has an integer value ranges from 1 to 255.

Default	enable
Format	config router vrrp interface preemptmode
	<slot.port> <vrID> <enable/disable>

config router vrrp interface advinterval

This command sets the advertisement value for a virtual router. The value for advinterval is time used for VRRP advertisement in seconds. The parameter <vrID> is the virtual router ID which has an integer value range from 1 to 255.

Default	1
Format	config router vrrp interface advinterval
	<slot.port> <vrID> <seconds>

config router vrrp interface authdetails

This command sets the authorization details value for the virtual router configured on a specified interface. The parameter <nonesimple> specifies the authorization type for virtual router configured on the specified interface. The parameter [key] is optional, it is only required when authorization type is simple text password. The parameter <vrID> is the virtual router ID which has an integer value ranges from 1 to 255.

Default The default value for authorization type is No authorization.

Routing Commands 8-33