7000 Series L3 Managed Switch Reference Manual for Software v2.0

Format

config router vrrp

interface authdetails

 

<slot.port> <vrID>

<nonesimple> [key]

config router vrrp removedetails

This command removes all VRRP configuration details of the virtual router configured on a specific interface. The parameter <vrID> is the virtual router ID which has an integer value ranges from 1 to 255.

Format

config router vrrp removedetails <slot.port>

 

<vrID>

config router rtrdiscovery adminmode

This command enables or disables Router Discovery on an interface. The possible values for <mode> are enable and disable.

Default

enable

Format

config router rtrdiscovery adminmode

 

<slot.port> <enabledisable>

config router rtrdiscovery maxinterval

This command configures the maximum time, in seconds, allowed between sending router advertisements from the interface. The range for maxinterval is 4 to 1800 seconds.

Default

600

Format

config router rtrdiscovery maxinterval

 

<slot.port> <4-1800>

config router rtrdiscovery mininterval

This command configures the minimum time, in seconds, allowed between sending router advertisements from the interface. The range for mininterval is 3 to the value of maxinterval.

Default

0.75 * maxinterval

Format

config router rtrdiscovery mininterval

 

<slot.port> <3-maxinterval>

8-34

Routing Commands

Page 174
Image 174
NETGEAR L3 Config router vrrp removedetails, Config router rtrdiscovery adminmode, Config router rtrdiscovery maxinterval