7000 Series L3 Managed Switch Reference Manual for Software v2.0

Policy Name

The name of this policy. (Note that the order in which the policies

 

are displayed is not necessarily the same order in which they were

 

created.)

Policy Type

The policy type, namely whether it is an inbound or outbound

 

policy definition.

Class Members

List of all class names associated with this policy.

show diffserv service info detailed

This command displays policy service information for the specified interface and direction. The <slot.port> parameter specifies a valid slot number and port number for the system. The direction parameter indicates the interface direction of interest.

Format

show diffserv service info detailed <slot.port> <in/

 

out>

DiffServ Admin Mode

The current setting of the DiffServ administrative mode. An

 

attached policy is only in effect on an interface while DiffServ is

 

in an enabled mode.

Interface

The slot number and port number of the interface (slot.port).

Direction

The traffic direction of this interface service, either in or out

Operational Status

The current operational status of this DiffServ service interface.

Policy Name

The name of the policy attached to the interface in the indicated

 

direction.

Policy Details

Attached policy details, whose content is identical to that

 

described for the show diffserv policy detailed command (content

 

not repeated here for brevity).

show diffserv service info summary

This command displays all interfaces in the system to which a DiffServ policy has been attached. The direction parameter is optional; if specified, only services in the indicated direction are shown, otherwise service information is shown for both directions, where applicable.

Format

show diffserv service info summary [in/out]

9-34

CLI Commands: Differentiated Services

Page 212
Image 212
NETGEAR L3 manual Show diffserv service info detailed, Show diffserv service info summary