7000 Series L3 Managed Switch Reference Manual for Software v2.0

show router rip info

This command displays information relevant to the RIP router.

Format

show router rip info

Router ID

Is a 32 bit dotted decimal number representing the interface.

RIP Admin Mode

RIP administrative mode of router RIP operation; enable acti-

 

vates and disable de-activates the RIP ability for the switch. This

 

is a configured value.

Global Route Changes

The number of route changes made by RIP to the IP Route Data-

 

base.

Global queries

The number of responses sent to RIP queries from other systems.

show router rip interface detailed

This command displays information related to a particular RIP interface.

Format

show router rip interface detailed

 

<slot.port>

Interface

Is the unit slot.port identifying each interface. This is a config-

 

ured value.

IP Address

The IP source address used by the specified RIP interface. This is

 

a configured value.

Send version

The RIP version(s) used when sending updates on the specified

 

interface. The types are none, RIP-1, RIP-1c, RIP-2. This is a

 

configured value.

Receive version

The RIP version(s) allowed when receiving updates from the

 

specified interface. The types are none, RIP-1, RIP-2, Both. This

 

is a configured value.

RIP Admin Mode

RIP administrative mode of router RIP operation; enable acti-

 

vates, disable de-activates it. This is a configured value.

Link State

Indicates whether the RIP interface is up or down. This is a con-

 

figured value.

Authentication Type

The RIP Authentication Type for the specified interface. The

 

types are none and simple. This is a configured value.

Authentication Key

The RIP Authentication Key for the specified interface. The

 

actual key will be **** to avoid compromising privacy. This is a

 

configured value.

 

 

8-20

Routing Commands

Page 160
Image 160
NETGEAR L3 manual Show router rip info, Show router rip interface detailed