Black Box PI126A, PI125A-R2 manual Configuration and Installation, Configuration Switches

SERIAL↔PARALLEL CONVERTERS

3. Configuration and Installation

The Converter is simple to install and extremely reliable. The following instructions will help you set up and install your converter properly. If you have any questions, please call Black Box Technical Support

at 724-746-5500.

3.1 Configuration Switches

The Converters each use a set of eight external DIP switches (see Figure 3-1) that allow configuration to a wide range of applications. Because all eight switches are in one externally accessible DIP-switch package, you don’t need to open the case for configuration. The configuration switches allow you to select data rates, parity, word length, and flow control. This section describes all switch locations, positions, and functions.

10