Lenovo TD230 manual SAS connectors on the hot-swap hard disk drive backplanes

Figure 61. SAS connectors on the hot-swap hard disk drive backplanes

1

2

SATA/SAS signal connector 2 SATA/SAS signal connector 3

3

4

SATA/SAS signal connector 0

SATA/SAS signal connector 1

When connecting the ThinkServer RAID 500 Adapter to the hot-swap hard disk drive backplanes using the mini SAS cable, connect the mini SAS connector 5 to the RAID card. Connect the four SAS connectors 6 , 7 , 8 , and 9 to the SAS connectors 0, 1, 2, and 3 on the hot-swap hard disk drive backplanes.

Note: Remove any device that might prevent you from connecting the hot-swap hard disk drive backplanes.

Chapter 5. Replacing FRUs 95