User Manual
Installation
1. Choose a suitable site for the base unit
Make sure it is not near to another telephone, nor to other electrical equipment.
2.Plug the mains power lead and the telephone line cord into the rear of the base unit.
3.Plug the mains adapter into a
230V AC, 50 Hz mains socket with the switch on the socket set to OFF.
Note: The illustration of adaptor may vary from country to country.
4.Switch on mains power at the socket
5.Fit the battery in the handset(s)
Insert the battery cell following the | Push the latch inwards, and then |
Battery polarity indication | slide the cover until it clicks |
| firmly into position. |
Please note the battery cell polarity during insert.
6
