User Manual
The Handset and Base Unit
Left Key Button | Right Key Button |
Press to enter menu and
Press to confirm selection; With the key “*” to lock or unlock the keypad; Press during a call to mute the mouthpiece
Up and Down Button
Press during programming to move through the menu.
Press during a call to change the volume in the earpiece.
CALL button
Press to begin, answer and end a telephone call.
RECALL button
You need the Recall function if your phone is connected to a PABX, or if you use Select Services. Press to transfer an outside call to another phone.
IN USE light
The IN USE light comes on when you have a connection to the telephone line.
Before you can use the handset to make calls for the first time, you will need to fit and fully charge the battery for 15 hours.
In standby mode, press to enter phonebook menu;
Press during programming to go back to the previous option, or to clear digits from the display.
INT button
Press to make an intercom call (if you have more than one handset)
Speakerphone Button
Press to turn the speakerphone ON/OFF
CHARGE light
The CHARGE light comes on when the handset's batteries are being charged.
HANDSET LOCATOR button
Press this to make the handset ring, if you cannot remember where you put it.
Press it again to stop the handset ringing.
3