User Manual
To de-register a handset
You may need to do this if you have more than one handset registered to your base unit and you need to replace a faulty handset.
1.Select <de-register> under REGISTRATION mode.
2.Press left
key, then key in the PIN (default 0000).
3.Press left
key, then key in the number of the handset you want to
4.Press left
key to confirm.
Note: You cannot
Intercom and transfer
To make an intercom call
1.Press the INT
button You hear Dial tone
2.Key in the number of the other handset
On the other handset's display, your number appears, and the INT symbol flashes. Then the
other handset user presses the CALL
button to connect the call.
For details of how to change the ringing melody and volume for intercom calls, see "INT MELODY" and "INT VOLUME" under "HANDSET SETTING" part.
To end an intercom call
•Press the CALL
button on your handset. The other person will hear
Busy tone, and also need to press the CALL
button to hand up.
To transfer a call
To transfer the outside call to another handset (if you have two or more handsets):
•Press the INT
button and key in the number of the other handset.
•The outside call is put on hold. When the other handset answers, you can speak to the user. If the other handset does not answer, you can get back to the outside call by pressing the INT button again.
To transfer the outside call to another outside phone:
22
