High-Speed Wireless PC/104Plus Adapter Version: 1.0
Page 9 of 42
2 Install Drivers & Client Utility This chapter describes how to install the drivers and client utility in Windows
98/ME/2000/XP.
2.1 Before You Begin
Before installing the new drivers into your PC, you need to remove all of the Wireless
LAN card drivers that you have installed.
During the installation, Windows 98/ME/2000/XP may need to copy systems f iles
from its installation CD. Therefore, you may need a copy of the Windows installation
CD at hand bef ore installing the drivers. On many systems, instead of a CD, the
necessary installation files are archived on the hard disk in C:\WINDOWS
\OPTIONS\CABS directory.
2.2 Installing the PC/104Plus card Drivers
Follow the steps below in order to install the PC/104Plus card drivers:
1. Insert the CD-ROM that was provided to you in this package. The setup
should run automatically. If the setup does not run automatically, then you
must manually select the setup.exe file from the CD-ROM drive.
2. Once the setup begins you will see the Install Shield Wizard, as the image
depicts below.