Event electronic PS5, PS8, PS6 warranty Specifications

Our engineers have spent years designing transducers, studio electronics and high performance studio monitoring systems, including some of the most popular professional speakers used today. Now, using the latest in digital acoustic design tools, along with high performance driver and power amplifier technology, we’ve developed the Event Project Studio monitors, which extend the performance and value limits of direct field monitors again.

Event engineers based these new 100 watt Project Studio monitors on the sound and reliability of our 200 watt 20/20bas 8” two-way Biamplified System. Indeed, the new biamplified PS8 monitor uses the same drivers, enclosure and active 4th order crossover as the 20/20bas monitor, with only 3dB less maximum acoustic output. The same 100 watt Project Studio amplifier, with different active crossover and subsonic filters, powers the PS5 and PS6.

The benefits of biamplification include lowered distortion, smoother amplitude and phase response, extended bandwidth, and convenience. Project Studio amplifiers feature significant improvements in signal-to-noise ratio, input common mode rejection ratio, and reliability. They produce less distortion and less heat as well.

Event Engineers developed the small desktop biamplified PS5 speaker using shielded driver and active crossover components from our proven Tria Triamplified Monitor. The PS5’s have a convenient front panel level control plus a retractable tilt stand for optimum positioning of its wood cabinet in personal monitoring environments.

The new PS6 6½” monitor uses a new magnetically shielded 6½” LF driver to go with our proven 1” natural silk dome HF transducer. The PS6 uses a pair of low restriction bass ports and establishes a convenient intermediate size for high performance 6” two-way systems.

UNPACKING Check your speaker carefully. The packing container was designed to protect your speaker during transit; immediately report any damage to your dealer or to the company that delivered them to you. The packing material is designed to be reused—do not discard it. Please complete and return your warranty card to activate your warranty and to help us keep in touch with you. Please tell us what you think of your new monitor and of your Event dealer.

SETUP The best performance from any speaker system comes with proper placement and use. There is no physical or acoustic distinction between individual left and right monitors when they are used in a stereo pair. Also, the cabinets can sit vertically or horizontally without concern for performance as long as both are situated similarly. For horizontal mounting, tip the cabinets outward so that the high frequency drivers are away from each other. Since the bass port is front mounted, you can mount the speakers near to, or even in, a wall without blocking the port.

1

SPECIFICATIONS

LF Driver:	PS5: 5 ¼”; PS6: 6½”; PS8: 8" magnetically shielded mineral
	filled polypropylene cone with high temperature voice coil
	and damped rubber surround.
HF Driver:	1" magnetically shielded natural silk dome with ferrofluid
	voice coil coolant.
Frequency Response:	PS5: 45Hz – 39kHz
	53Hz – 19kHz, ±3dB, Ref 500Hz
	PS6: 45Hz – 20kHz, ±3dB, Ref 500Hz
Crossover:	PS8: 35Hz – 20kHz, ±3dB, Ref 500Hz
	PS5: 2.6kHz active 2nd order asymmetrical
	PS6: 2.6kHz active 4th order asymmetrical
LF Amplifier Power:	PS8: 2.2kHz active 4th order asymmetrical
	70W
HF Amplifier Power:	30W
Noise	>100dB below full output, 20kHz bandwidth, unweighted
Input Connectors:	XLR and ¼" connector accepts balanced or unbalanced
Polarity:	sources
	Positive signal at + input produces outward LF cone
Input Impedance:	displacement
	40kΩ balanced, 20kΩ unbalanced
Input Sensitivity:	0.9V input produces full output with Input Sensitivity
Input Level Control Range:	control at maximum
	20dB
Protection:	RF interference, output current limiting, over temperature,
	turn-on/off transient, subsonic filter, internal mains fuse
Indicators:	Combination Power ON / Clip LED indicator
Power Requirements:	Factory programmed for either 120V~ 60Hz,
	220-240V~ 50/60Hz or 100V~ 50/60Hz, 100VA;
	Power via detachable 3 circuit IEC type linecord
Cabinet:	5/8" vinyl laminated lock-mitered MDF
Dimensions:	PS5: 7½"W x 10½"H x 9"D
	PS6: 8¼"W x 12½"H x 10"D
	PS8: 10¼"W x 14¾"H x 11¾"D
Weight:	PS5: 16½ lbs. each
	PS6: 23 lbs. each
	PS8: 26½ lbs. each

Model PS5, PS6 and PS8 specifications are subject to change without notice.

6

CARE AND MAINTENANCE Your Event Direct Field Monitors will not require any special care or maintenance if properly used. The cabinet is finished