eXplora PC User’s Manual
Chapter 4
Computer Setup
eXplora is easy to be set up. After remove the eXplora from shipping box, please follow the steps below to finish its setup.
Setting up the AC Input voltage selection
There are two settings for the system to operate. You may set the AC input voltage to 115V or 230V.
The AC Input Voltage Selection can be found at the back of your computer.
Note:
Turn off your computer before setting up your computer.
Improper voltage selection may cause system damage. When operating in the United States the power supply should always be set to the factory default setting of 115 volts.
8
