7.Do not operate the camera beyond the specified temperature, humidity or power source ratings. This camera is suitable for indoor and outdoor operation.
Use the camera at temperatures within -10°C to +50°C (14°F to 122°F) and in an IP66 compliant environment; this device is not rated as submersible. The input power source is 12VDC or AC24V. Be sure to connect the proper voltage, as too high a voltage will likely cause the camera to fail, and such damage is not covered by the warranty. The use of properly fused or Class 2 power limited type supplies is highly recommended. Regulated supply is required for 12VDC operation.
8.Mounting
Use care in selecting a solid mounting surface which will support the weight of the camera plus any wind, snow, ice or other loading, and securely attach the camera to the mounting surface using screws and anchors which will properly support the camera. If necessary (e.g. when mounting to drop ceilings) use a safety wire to provide additional support for the camera.
CAUTION |
RISK OF ELECTRIC SHOCK |
DO NOT OPEN |
CAUTION: |
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK), NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
OVERVIEW
The EHD363 is an outdoor, vandal resistant 3-axis IR dome camera which utilizes a Sony 1/3” 960H Exview HAD CCD Sensor and enhanced Effio-E DSP to provide high resolution 700TVL color video for security surveillance applications. Advanced functions including Digital WDR/ATR (Adaptive Tone Reproduction), 2D-NR (2D Noise Reduction) and Anti CR (Anti Color Rolling) insure optimum image quality under low or unbalanced lighting conditions. Vandal Proof materials and an IP66 weather resistant housing allow reliable operation in outdoor and indoor environments. True day/night operation combined with 30m (~98ft.) range high efficiency IR LEDs makes the EHD363 suitable for a wide range of day and night surveillance situations. Plus, dual voltage 12VDC/24VAC operation, 3-axis mechanical design and built-in f=3.7~12mm varifocal auto iris lens bring flexibility to installation and field of view adjustment.
FEATURES
Sony 1/3” 960H EXview HAD II high resolution CCD sensor for 700TVL images
Employs Sony Enhanced Effio-E Digital Signal Processor (DSP) chip-set for advanced image processing.
Built-in Auto Gain Control (AGC), Auto Tracing White Balance (ATW) enhance image quality
Advanced DSP functions enhance image quality: Digital WDR/ATR (Adaptive Tone Reproduction), 2D-NR (2D Noise Reduction), Anti CR (Anti Color Rolling)
Varifocal DC iris 3.7~12mm lens and 3-Axis design for flexible field of view adjustment
Eleven high efficiency IR LEDs with 30m (~98ft.) range in for low/no light applications
True day/night auto switching for best day time color and low light performance
Vandal proof to withstand impact of a 10 pound sledgehammer.
1
