EverFocus EZ600/W operation manual Features, Components Mounting Position Connection, Dimensions

EZ600/W

EZ600/B

HIGH PERFORMANCE

BULLET CAMERA

OPERATION MANUAL

Before attempting to connect or operate, please read and follow these instructions.

CAUTIONS

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions;

1.This device may not cause harmful interference.

2.This device must accept any interference received, including interference that may cause undesired operation.

Note -

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.”

WARNING -

This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

Caution -

Do not make any changes to the houseing or internal parts. This could void the FCC certification and may void the warranty.

CAUTION

1.IF DC power is used regulated DC12V 500mA power supply is recommended for use with this camera for the best picture and the most stable operation.

An unregulated power supply may cause damage to the camera.

If an unregulated power supply is used, product warranty may be void.

2.It is recommended that the camera is used with a monitor that has

a CCTV quality 75Ω video impedance level. If your monitor or other equipment is switched to high impedance then please adjust accordingly.

3.Do not attempt to disassemble the camera to gain access to the internal components. Refer servicing to the manufacturer

4.Never face the camera towards the sun or any bright or reflective light, which may cause smear on the picture and possible damage to the CCD.

5.Do not remove the serial number sticker.

CAUTIONS

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)

This marking shown on the product or its literature, indicate that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

This product should not be mixed with other commercial wastes purchased this product, or their local government office, for details of where and how they can take item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract.

Household users should contact either the retailer where they for disposal.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK). SERVICING MUST BE DONE BY QUALIFIED SERVICE PERSONNEL.

This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient mangnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating and maintenance(servicing) instruction in the literature accompanying the appliance.

FEATURES

•1/3" Sony Super-HAD CCDⅡ

Minimum illumination 0.00002 Lux

( F1.2, 30 IRE, Sense-up X256, AGC high ) S/N Ratio 50dB

•High Resolution 600TV Lines

This camera displays a high resolution of 600 TV Lines using sophisticated full digital image processing, 10 bit A/D serial signal processing and special algorithm technologies.

• 3D DNR (3D Digital Noise Reduction)

The DNR technology greatly reduces noise thus delivering a crisp and clear image.

This camera’s DNR function utilizes an adaptive 3D Filter to reduce noise caused by movement and the evironment.

• DAY&NIGHT

The Day & Night operation feature an ‘auto’ mode which switches between color and B&W modes automatically based on the level of illumination in the scene. The COLOR mode operates during bright conditions to provide optimum colors while the B&W Mode operates during dark conditions to enhance the definition of the image. Or, the camera may be set to return a color image at all light levels.

• Privacy Mask Function

The Privacy masking feature allows for the ‘blanking’ of specific areas in a scene where viewing or recording is prohibited or not desired.

• OSD (On Screen Display)

This camera is easily configured with its OSD (On Screen Display), menu. The menu can be displayed in multiple languages.

COMPONENTS	MOUNTING POSITION	CONNECTION
Bullet
Camera			DC12V POWER SUPPLY /
			AC24V POWER SUPPLY
		DC12V/AC24V
		(RED)
Mounting		BNC FEMALE	VIDEO IN
Bracket
		1/4"-20 UNC
	360˚	Depth 4.5(0.18)	TV MONITOR
			OR DVR
Mounting
Screw 3ea
		Joystick for OSD
Power	360˚	90˚
Pigtail Cable
Operation
Manual		When you install the camera, please seal the ends of
		cables to protect the camera coneections from humidity
		problems.

DIMENSIONS

Unit: mm(inch)

Ф36(Ф1.41)133(5.23)

			Camera with sunshield
	33.5(1.32)
			124(4.88)
Ф29(Ф1.14)		51.2(2.02)

Focus Ring		Zoom Ring
(NEARFAR)		(WideTele)
	Camera body only

41.5(1.63)

3-Ф4.5(0.11-Ф0.18)

36 (1.41)

Mounting base pattern

Ф60(Ф2.36)

Mount