SPECIFICATION
Signal Format | NTSC |
| PAL | |
Image Device | 1/3" Sony Super HAD CCDⅡ | |||
Total Pixels | 811(H) x 508(V) |
| 795(H) x 596(V) | |
approx.410K pixels |
| approx. 470K pixels | ||
|
| |||
Effective | 768(H) x 494(V) |
| 752(H) x 582(V) | |
Pixels | approx. 380K pixels |
| approx. 440K pixels | |
Inter. H/V | 15,734/59.94Hz |
| 15,625/50Hz | |
H.Resolution | 600TV Lines |
| ||
Minimum | 0.00002 Lux / F1.2 ( Sense- up ) | |||
illumination | ||||
|
|
| ||
S/N Ratio | More than 50dB (AGC Off) | |||
Electronic | 1/60 ~ 1/100.000 sec |
| 1/50 ~ 1/100.000 sec | |
Shutter |
| |||
|
|
| ||
Manual | 1/60(50), FLK, 1/250, 1/500, 1/2K, 1/5K, 1/10K, 1/100K | |||
Shutter | X2, X4, X8, X16, X32, X64, X128, X256 | |||
X2, X4, X8, X16, X32, X64, X128, X256 (8X Recommended) | ||||
AGC | Off / Low / Middle / High | |||
White | ATW / PUSH / | |||
Balance | ||||
|
|
| ||
Sync | Internal |
| ||
System |
| |||
|
|
| ||
Privacy Zone | 8 Zone |
| ||
Flickerless | OFF/ON |
| ||
Lens | varifocal (f3.5 ~ 16.0mm) | |||
3DNR | Off / On (Plus Level setting) | |||
Motion | 4 Areas |
| ||
Detection |
| |||
|
|
| ||
Language | English, French, Russian,German, Spanish, Dutch | |||
|
|
| ||
Additional | Mirror(H,V,H/V), Digital Zoom, Freeze,Negative Image, BLC, | |||
DSP | ||||
Functions |
|
|
| |
Video Output | CVBS |
| ||
Input Power | DC12V ±10% Max 170mA | |||
Source | AC24V ±10% Max 1.8W | |||
OSD MANUAL
GENERAL STRUCTURE
SETUP MENU
EXPOSURE | •SHUTTER •BRIGHTNESS •AGC | |||
| ||||
WHITE BAL | •ATW •PUSH | |||
•MANUAL | •INDOOR •OUTDOOR | |||
| ||||
DAY&NIGHT | •COLOR | •B/W •AUTO | ||
| •FREEZE •MIRROR | |||
IMAGE | •SHARPNESS | •COLOR GAIN | ||
| •GAMMA | •NEG.IMAGE | ||
3DNR | •LEVEL | •RETURN | ||
SPECIAL | •CAM TITLE | •LANGUAGE | ||
•MOTION | •PRIVACY | |||
| ||||
RESET | •FACTORY RESET | |||
EXIT |
|
|
| |
UP
MENU (SELECTION KEY)
LEFT
RIGHT
DOWN
Press in on joystick for
enter/select
OSD MANUAL
OSD FUNCTION DESCRIPTION
1.EXPOSURE
:Enables the user to configure the following functions: SHUTTER, AGC,
BLC,
| EXPOSURE |
|
| SHUTTER | AUTO |
| BRIGHTNESS | 50 |
| AGC | OFF |
| AUTO | |
| BLC | BLC┛ |
- SHUTTER | OFF | |
RETURN | RET┛ | |
• AUTO : Exposure is controlled |
|
|
automatically. |
|
|
• FLK : Enable FLICKERLESS. |
|
|
(NTSC: 1/100, PAL: 1/120) |
|
|
• FIXED : Allow the shutter speed to be set manually. > 1/60(50), 1/250, 1/500, 1/2K, 1/5K, 1/10K, 1/100K * ( ) is for PAL TYPE
- BRIGHTNESS : AUTO Mode Only.
- AGC : Low, Middle, High. *If AGC feature is turned off,
-
-BLC : Back Light Compensation.
•HSBLC : Highlight Suppression BLC will darken bright parts of the image.
-
OSD MANUAL
2.WHITE BALANCE
:Enable the user to set the White Balance through controlling R,G,B
Levels.
WHITE BAL MANUAL |
|
BLUE | 24 |
RED | 32 |
RETURN | RET┛ |
|
|
•ATW : White Balance is traced automatically through a wide range of color temperatures.
(2,500K ~ 9,500K)
• PUSH : White Balance is automatically adjusted for the current color temperature.
•
•MANUAL : Enable the manual adjustment of RED GAIN and BLUE GAIN.
•INDOOR : White Blance is automatically adjusted at 3,200K base color temperature.
•OUTDOOR : White Blance is automatically adjusted at 5,400K base color temperature
OSD MANUAL
3.DAY&NIGHT
:Switching the output image from COLOR when in a bright environment to B&W when dark.
DAY & NIGHT AUTO |
| |
DWELL TIME |
| 10sec |
| ||
DN LEVEL |
| 4 |
ND LEVEL |
| 6 |
RETURN | RET┛ | |
|
|
|
- AUTO : Color or B/W mode auto change.
• DETECT MODE
VIDEO : Select to detect mode as level of VIDEO.
• DWELL TIME :
Duration of continuous lighting condition (Bright or Dark) before switching mode.
(0~10 SEC).
• D>N LEVEL : The Level where the change occurs from COLOR(Day) to BW(Night).
• N>D LEVEL : The Level where the change occurs from BW(Night) to COLOR(Day).
- B/W : Image output is fixed at B&W.
• BURST ON/OFF : Select the burst signal ON/OFF when Night condition.
- COLOR : Enables user to fix the output image in COLOR at all light levels.
OSD MANUAL
4.IMAGE
:Configurations for the following settings: FREEZE, MIRROR,
IMAGE
FREEZEOFF
MIRROROFF
SHARPNESS5
COLOR GAIN ┛
GAMMA0.45
NEG.IMAGEOFF
RETURNRET┛
-FREEZE : Freezes the output image(use requires real time access to the camera controls).
-MIRROR
•MIRROR : Output image is mirrored (Left to Right).
•
•ROTATION : Output image is rotated
-
-SHARPNESS : Sharpness of the output image can be adjusted.
-COLOR GAIN : RED GAIN or BLUE GAIN can be adjusted.
-GAMMA : Gamma vaule can be set.
-NEG.IMAGE : Output image is coverted to a negative image.
5.3DNR
:
- LEVEL : The degree of noise | 3DNR |
| |
reduction can be set. |
| ||
LEVEL | 50 | ||
| |||
| RETURN | RET┛ | |
|
|
|
OSD MANUAL
6.SPECIAL
:Configurations for the following settings: CAM TITLE, LANGUAGE, MOTION, PRIVACY.
SPECIAL |
|
CAM TITLE | OFF |
LANGUAGE | ENGLISH |
MOTION | ON┛ |
PRIVACY | ON┛ |
RETURN | RET┛ |
|
|
-CAMERA TITLE : Displays the title editing menu.
-LANGUAGE : The Language to display the OSD in, (English, Russian, Spanish, German, French, Dutch).
-MOTION : The camera will monitor the output image for motion
and display a OSD Icon uppon detection.
•AREA SELECT : 4 areas can be selected for motion detection.
•AREA DISPLAY : Areas of motion detection can be toggled on and off
•LEFT/RIGHT : Moves the detection area left and right.
•WIDTH : The width of the detection area is set.
•TOP/BOTTOM : Moves the detection area up and down.
•HEIGHT : he height of the detection area is set.
•SENSITIVITY : Level of sensitivity for detecting motion is set.
•MOTION VIEW : Displays the areas of motion on the screen.
OSD MANUAL
-PRIVACY : Up to 8 areas of the output image can be obscured.
•AREA SELECT : Select up to 8 areas.
•AREA DISPLAY : Displays the masked areas.
•LEFT/RIGHT : Moves the pricacy area rght and left.
•WIDTH : The width of the privacy area is set.
•TOP/BOTTOM : Moves the pricacy area rght and left up and down.
•HEIGHT : the height of the privacy area is set.
•COLOR : Color to use for the mask is set.
7.RESET
:Returns the camera to its factory default.
RESET
FACTORY RESET┛
RETURNRET┛
