Everpure EV9100-91 installation and operation guide Benefits, Applications, Demliming Schedule

Installation and Operation Guide

HFC-10 Deliming System for Ware Washing Equipment

Provides simple, efficient deliming of commercial ware washing equipment, utilizing ScaleKleen™, Everpure’s proprietary scale remover.

BENEFITS

•Permanently plumbed in the hot water feed line before booster heater and dishwasher.

•Drastically reduces maintenance teardowns due to limescale accumulation.

•Assures high efficiency of heating elements by removing limescale deposits.

•Utilizes Everpure’s proprietary foodgrade delimer ScaleKleen™ — no offensive odors, no burned skin or clothing, environmentally safe.

•High grade re-enforced nylon components forlong life.

•Extends life of equipment.

APPLICATIONS

•Flash steamers

•Conventional steamers

•Combi-ovens

•Coffee/espresso machines

System Part No. EV9100-91

DEMLIMING SCHEDULE

Dishwasher Operation (Hours)

Water Hardness	2-8	8-14	14-20
Soft, 0-3 gpg	30 days	24 days	18 days
Moderately Hard, 3-7 gpg	24 days	18 days	12 days
Very Hard, > 15 gpg	9 days	6 days	3 days

To determine water hardness and frequency of deliming, follow instructions on hardness test strip package and compare to hours of operation.

Includes:

(1)2.2 lb. Scalekleen package

(1)Diptube assembly

(1)Hardness Test Strip

FLOW

SPECIFICATIONS

Dimensions: 121⁄2"L x 51⁄2"W x 51⁄2"D

(allow extra 4" underneath for shell removal) Inlet connection: 1/2" MPT

Pressure (Minimum - Maximum): 10 - 125 psi (non-shock)

Maximum temperature: 160°F

Shipping weight: 5 lbs.

Operating weight: 7 lbs.

INSTALLATION

Note: System must be installed on inlet water line to equipment. Everpurerecommends the installation of a by-pass for de-liming.

1.Turn off power to equipment and drain water from system, if necessary.

2.Provide appropriate tee connections for inlet and outlet connections. Refer to the diagram at right.

3.Install a bypass valve (buyer provided) between the inlet and outlet connections. Refer to the diagram at right.

4.Install ball valves to inlet and outlet connections on the HFC-10 head assembly. NOTE: Always use a good grade of pipe dope or teflon tape on connections.

5.Make appropriate connections to ball valves.

1

2

3

4

BALL VALVE BYPASS VALVE

SPARE PARTS:

1.EV3095-02: Head Assembly

2.EV3095-04: Gasket

3.EV3095-03: Sump Assembly

4.EV3093-35: Dip Tube

EV3095-44: Bracket Kit (bracket, nut, mtg. screws)

EV9796-01: ScaleKleen 2.2 lb. pkg. (4 pack)

EV3024-94: Hardness Test Strip

Printed in U.S.A. EV3095-06E AU05