SCALEKLEEN INSTRUCTIONS FOR STEAMERS WITH EXISTING EVERPURE FILTER

1.Remove and discard the existing Everpure filter cartridge from the steamer.

2.For a small steamer (less than 10KW or 100,000 BTU’s), use two 2.2 lb. (two kilogram) packages of ScaleKleen. For a large steamer (greater than 10KW or 100,000 BTU’s), use four 2.2 lb. (four kilogram) packages of ScaleKleen. For regularly scheduled maintenance, reduce these quantities in half.

3.Remove the top plug assembly from the Everpure JT Cartridge. NOTE: The JT Cartridge is designed to hold a maximum of one 2.2 lb. (one kilogram) package of ScaleKleen.

4.Cut one corner of the ScaleKleen package, and pour the contents directly into the JT Cartridge. Once the ScaleKleen is in the cartridge, carefully reinsert the top plug assembly.

NOTE: Ensure that the plug assembly is seated to the lugged outer cap. If not, placement of the JT Cartridge into the head will be hindered.

As an alternative, you can dissolve one 2.2 lb. (one kilogram) package of ScaleKleen in warm water. Carefully pour the solution into the JT Cartridge. Repeat this step until all of the solution has been used.

5.Insert the filled JT Cartridge into the head assembly, and turn the shut-off valve to the fully opened position.

6.Flush the cartridge for a minimum of 1 gallon (a flow rate of 0.5 GPM would require 2 minutes) to transfer the ScaleKleen into the boiler tank to be de-scaled.

7.Turn the steamer on. Once the steamer reaches operating temperature, allow 30 minutes for the ScaleKleen to remove the scale, then turn the steamer off.

8.Blowdown (flush) the boiler until the pH of the effluent is within one pH unit of the incoming (influent) water.

9.Once the steamer has been flushed out, it can be placed back into service.

10.After all de-scaling has been completed, remove the JT Cartridge and install a new Everpure filter cartridge.

SCALEKLEEN INSTRUCTIONS FOR DRIP COFFEE MAKERS

1.Remove and discard the existing Everpure filter cartridge.

2.For coffee makers brewing one pot (1/2 gallon) per cycle, use one 2.2 lb. (one kilogram) package of ScaleKleen. For regularly scheduled maintenance, reduce these quantities in half.

3.Remove the top plug assembly from the Everpure JT Cartridge. NOTE: The JT Cartridge is designed to hold a maximum of one 2.2 lb. (one kilogram) package of ScaleKleen.

4.Cut one corner of the ScaleKleen package, and pour the contents directly into the JT Cartridge. Once the ScaleKleen is in the cartridge, carefully reinsert the top plug assembly.

NOTE: Ensure that the plug assembly is seated to the lugged outer cap. If not, placement of the JT Cartridge into the head will be hindered.

As an alternative, you can dissolve one 2.2 lb. (one kilogram) package of ScaleKleen in warm water. Carefully pour the solution into the JT Cartridge. Repeat this step until all of the solution has been used.

5.Insert the filled JT Cartridge into the head assembly, and turn the shut-off valve to the fully opened position.

6.Remove the filter basket and spray head, then dump the coffee grounds from the machine. Place the spray head in the target coffee pot.

7.Cycle the coffee maker once, vending one pot. Let it sit for 30 minutes. The spray head in the pot will also be cleaned.

8.After 30 minutes, cycle the coffee maker with 10 pots of fresh water. This will flush the ScaleKleen from the boiler and water lines. After the tenth pot, check the pH of the hot water. When the pH of the hot water is within one pH unit of the incoming cold water, the ScaleKleen is flushed out. Reassemble the spray head to the coffee maker.

NOTE: If there is a hot water tap available, flush one pot through to de-lime tap.

9.Once the coffee maker has been flushed out, it can be placed back into service.

10.After all de-scaling has been completed, remove the JT Cartridge and install a new Everpure filter cartridge.

CAUTION: In case of contact with eyes or skin, rinse thoroughly with water. Avoid prolonged contact with stainless steel surfaces. Contains salt which may cause surface discoloration. Spots may be removed with a mild scouring agent.

IF USING PH TEST KIT

1.Using one test strip, test and record the pH of the incoming water.

2.Using one test strip, test and record the pH of the product water flowing from the de-scaled appliance.

3.When the pH of the outgoing product water is within one pH unit of the incoming water, the ScaleKleen has been sufficiently flushed out and the appliance can be placed back into service.

NOTE: Flushing the appliance with fresh water will raise the pH of the product water.

For sales, replacement components, and service, contact your Everpure dealer or:

Technical Service

Everpure, LLC: 1040 Muirfield Drive • Hanover Park, Illinois 60133 • 800.323.7873

800.942.1153

In Europe: Toekomstlaan 30 • B-2200 Herentals, Belguim

www.everpure.com

In Japan: Hashimoto MN Bldg. 7F • 3-25-1 Hashimoto Sagamihara-Shi • Kanagawa 229-1103, Japan

 

Printed in U.S.A.

EV3064-19A FE05

Page 1 Page 2
Page 2
Image 2
Everpure EV9655-00 installation and operation guide If Using PH Test KIT, Scalekleen Instructions for Drip Coffee Makers
Page 1 Page 2

EV9655-00 specifications

The Everpure EV9655-00 is a top-tier water filtration system designed to provide exceptional quality drinking water for commercial and residential use. Combining advanced filtration technologies with user-friendly features, this system is ideal for various applications, including restaurants, cafes, offices, and homes.

One of the standout features of the Everpure EV9655-00 is its innovative Micro-Pure technology. This technology utilizes a proprietary blend of activated carbon and high-grade filtration materials, effectively removing contaminants from water, including chlorine, sediment, and various harmful substances. By reducing impurities, the EV9655-00 ensures that the water you consume has better taste, odor, and overall quality.

The EV9655-00 operates using a dual-stage filtration process. The first stage captures larger particulates, while the second stage further refines the water, targeting smaller particles and improving clarity. This comprehensive approach ensures that the filtered water is free from impurities and meets the highest standards for cleanliness.

Another notable characteristic of this system is its capacity. The EV9655-00 can filter a significant volume of water, making it suitable for high-demand environments. It is designed to provide consistent performance over time, allowing users to maintain a steady supply of clean water without frequent cartridge changes. Each cartridge can typically filter up to 6,000 gallons, ensuring cost-effectiveness.

The installation of the Everpure EV9655-00 is straightforward, making it a practical choice for various settings. The compact design allows for easy placement under sinks or cabinets, conserving valuable space. Additionally, the system comes equipped with a detailed user manual, simplifying the installation process for both beginners and experienced users.

Furthermore, the Everpure EV9655-00 features a built-in scale inhibitor. This technology prevents mineral buildup in plumbing and appliances, extending their lifespan and maintaining efficiency. This is especially beneficial in areas with hard water, where scale buildup can lead to costly repairs and maintenance.

In terms of maintenance, the EV9655-00 requires minimal upkeep. Regular cartridge replacement keeps the system functioning optimally. The indicator light on the unit provides timely reminders for cartridge changes, ensuring that users can enjoy the best filtration performance without missing a beat.

Overall, the Everpure EV9655-00 is an excellent choice for those seeking a reliable water filtration system that combines state-of-the-art technology, durability, and user-centric design. Whether for commercial or residential use, it stands out as a trusted solution for delivering high-quality water.
Top Page Image Contents