34FX40HR TREADMILL

MAINTENANCE

HOW TO MAINTAIN THE EVO FX40HR TREADMILL:

Proper maintenance is very important to ensure your treadmill is always in top working condition. Improper maintenance could cause damage or shorten the life of your treadmill and exceed the LIMITED WARRANTY coverage.

•Important: DO NOT use abrasives or solvents to clean the treadmill. To prevent damage to the computer, keep liquids away and keep it out of direct sunlight.

•Inspect and tighten all parts of the treadmill regularly. Replace any damaged or worn parts immediately.

BELT ADJUSTMENT:

ALL BELT ADJUSTMENTS ARE CONSIDERED MAINTENANCE, AND ARE THE RESPONSIBILITY OF THE END USER. Belt adjustment and tension performs two functions: adjustment for tension and centering. The running belt has been adjusted properly at the factory. However transportation, uneven flooring or other unpredicted reasons could cause the belt to shift off center resulting in the belt rubbing on the plastic side rail or end caps and possibly causing damage to the equipment. To adjust the belt back to it’s proper position please follow the directions below:

•Walking belt has shifted to the left: First unplug the power cord from the surge protector. Using the hex key provided, turn the left rear roller adjustment bolt 1/4 turn in the clockwise direction. Plug the power cord back into the surge protector and run the treadmill at 2.5 mph. You should see the belt start to correct itself, moving back towards the center. Repeat the above procedure until the walking belt is centered. It may be necessary to set walking belt tension once you have completed this procedure if the belt feels like it is slipping while walking. Refer below to the "Walking belt slipping" instructions.

•Walking belt has shifted to the right: First unplug the power cord from the surge protector. Using the hex key provided, turn the right rear roller adjustment bolt 1/4 turn in the clockwise direction. Plug the power cord back into the surge protector and run the treadmill at 2.5 mph. You should see the belt start to correct itself, moving back towards the center. Repeat the above procedure until the walking belt is centered. It may be necessary to set walking belt tension once you have completed this procedure if the belt feels like it is slipping while walking. Refer below to the "Walking belt slipping" instructions.

•Walking belt is slipping: First unplug the power cord from the surge protector. Using the hex key provided, turn both the left and right rear roller adjustment bolts the equal amounts, 1/2 turn in the clockwise direction. Plug the power cord back into the surge protector and run the treadmill at 2.5 mph. You should now walk on the belt to determine if the belt is still slipping. Repeat the above procedure until the walking belt is not slipping. The tension should be just tight enough not to slip. If proper tension cannot be achieved within four attempts please contact Smooth Fitness Technical Support. Belt centering may be necessary once you have completed the tensioning procedure.

WARNING! Do not over tighten rollers! This will cause premature roller bearing failure!

Right and left tension bolts are located at the rear of the treadmill.

Page 33 Page 35
Page 34
Image 34
Evo Fitness user manual Maintenance, HOW to Maintain the EVO FX40HR Treadmill, Belt Adjustment
Page 33 Page 35

FX40HR specifications

The Evo Fitness FX40HR is a state-of-the-art fitness machine designed to elevate your workout experience. Engineered for cardio enthusiasts and strength trainers alike, this versatile piece of equipment is packed with features that cater to both beginners and seasoned athletes.

One of the main highlights of the FX40HR is its advanced heart rate monitoring technology, which is crucial for optimizing workout intensity and ensuring a safe exercise regimen. The built-in heart rate sensor provides real-time feedback, allowing users to stay in the desired heart rate zone to achieve maximum fat burning and cardiovascular benefits. This is complemented by a user-friendly display that showcases essential workout metrics such as time, speed, distance, and calories burned.

The FX40HR incorporates multiple resistance levels that can easily be adjusted to match individual fitness levels. This versatility makes it suitable for everyone, from those embarking on their fitness journey to athletes seeking a challenging workout. The magnetic resistance system ensures smooth transitions and quiet operation, allowing you to focus on your training without distractions.

Another significant feature of the Evo Fitness FX40HR is its ergonomic design. The adjustable seat and handlebars promote proper posture, reducing the risk of strain during workouts. The machine is also compact and foldable, making it an excellent choice for those with limited space. Its robust construction ensures durability and stability, providing a reliable foundation for any fitness routine.

The FX40HR is equipped with multiple built-in workout programs that cater to various fitness goals, from weight loss to endurance training. These programmable workouts, combined with the heart rate monitoring system, create a dynamic experience that keeps users engaged and motivated.

In terms of connectivity, it boasts Bluetooth compatibility, allowing for seamless integration with fitness tracking apps and devices. This feature enables users to log their workouts, track progress, and share achievements, adding a social aspect to their fitness journey.

In summary, the Evo Fitness FX40HR is a comprehensive workout machine that combines cutting-edge technology, adjustable resistance, and user-focused design. Suitable for users of all levels, its features pave the way for effective and enjoyable workouts, making it a valuable addition to any home gym. Whether you're looking to boost your cardio, build strength, or simply maintain fitness, the FX40HR meets the diverse demands of modern fitness enthusiasts.
Top Page Image Contents