Evolution Technologies MK-7 Sending a PROGRAM CHANGE number, Sending BANK MSB and LSB Message

Models: MK-7

1 4
Download 4 pages 24.69 Kb
Page 3
Image 3
9.Sending a PROGRAM CHANGE number

*Press + and - keys simultaneously to reset the pitch to default level.

8-4 Release the SELECT button.

9.Sending a PROGRAM CHANGE number

This function allows send any MIDI PROGRAM CHANGE 0-127.

9-1 Hold down SELECT button (2) and ...

9-2 Press PROGRAM key (5),

9-3 Press the numeric keys (4) to set the PROGRAM CHANGE number to be sent. Also you can use "+" or "-" key to change the value.

*The PROGRAM value must be a three-digit number - to access PROGRAM number 7, type ‘007’.

9-4 Release the SELECT button. The PROGRAM CHANGE MESSAGE is sent to connected equipment. Note: If the number you input is over 127, it will retain previous LSB or MSB.

10.Sending BANK MSB and LSB Message

This allows you send any value of MSB or LSB each from 0-127.

10-1 Hold down SELECT button (2) and press BANK LSB key (6). Press numeric keys (4) to change the LSB value. Then release the SELECT button.

10-2 Hold down SELECT button (2) and press BANK MSB key (7). Press numeric keys to change the MSB value. Then release the SELECT button.

11.PROGRAM & BANK CHANGE Memory

You can assign a selected PROGRAM CHANGE as well as a BANK LSB and a BANK MSB to one of six numeric keys (0-5).

11-1 Select the required PROGRAM CHANGE, BANK LSB and MSB to relevant chapter.

11-2 Hold down SELECT button (2) and press SAVE key (9).

11-3 Press the numeric key (from 0 to 5) you wish to assign to. Release the SELECT button (2). Now, the PROGRAM and BANK CHANGE is memorized on the selected numeric key.

11-4 By holding down SELECT button (2) and press this numeric key, you can send the desired PROGRAM and

BANK CHANGE.

12.Specifications

Keyboard:

37 mid-size keys

Control:

WHEEL, MIDI CHANNEL, PROGRAM, MEMORY, TRANSPOSE, OCTAVE, BANK LSB, BANK MSB,

 

RESET-AC, GM-RESET, PITCH BEND, WHEEL Switch, POWER SWITCH.

Jack:

DC IN (DC 9V)

Rated Voltage: DC 9V (6 “AA” size or UM-3 batteries)

Connector:

MIDI OUT connector specially for PC sound card game port.

Dimensions:

469 x 105 x 39mm

Weight:

560 grams

Note: Specifications are subject to change without prior notice.

APPENDIX

MIDI IMPLEMENTATION CHART

Function

 

Transmitted

Received

Remarks

Basic

Default

1-16

 

 

Channel

Changed

1-16

 

 

 

Default

----------------------------

 

 

Mode

Messages

X

 

 

 

Altered

***********************

 

 

Note

 

5-113

 

 

Number

True Voice

***********************

 

 

Velocity

Note ON

O/X

 

 

 

Note OFF

X

 

 

Aftertouch

Keys

X

 

 

 

Channels

O/X

 

 

Pitch Bend

O

Page 3
Image 3
Evolution Technologies MK-7 Sending a PROGRAM CHANGE number, Sending BANK MSB and LSB Message, Specifications, Appendix