3.Plug the other end of your phone charge cord into your personal cell phone.
4.Once phone is plugged into its charge cord contin- ue to pull the RIP CORD for one minute (approximately 80 pulls per minute).
This can provide up to two minutes of talking time with this process. The phone’s cell life can also be extended by continuing the pulling the RIP CORD during the phone’s use.
Caution
•Forever Flashlight Rip Cord generates a strong
magnetic field that surrounds it. Keep the unit at least one foot away from medical devices, computers, magnetic storage media, or other devices such as:
•Pacemakers • Credit cards
•Cassette tapes • Televisions
•Computer discs • Video tapes tube (CRT)
•Any device with a cathode ray
Specifications
• Outer dimension: 5'' x 1.75'' x 1.75''
• Weight: 0.40 lbs
• 5mm LED: 5x @ 9200mcd, 0.5W
• Power generator: 6V, 300mA
• Siren sound output: 92dB (optional)
• DC output: 4.5V, 600mA
• DC input: 6V, 200mA
Excalibur Electronics reserves the right to make
technical changes without notice in the
interest of progress.
10
•Do NOT attempt to remove the Light Emitting Diode (LED) or any internal part.
•Do NOT attempt to point the light into the human eye directly. This strong light may cause physical damage to an eye.
•Do NOT attempt to put wrist band around any other parts of the body, besides the wrist. Children under age should not use the Forever Flashlight Rip Cord and should have
adult supervision at all times.
NOT ALL CELL PHONES USE THE SAME CURRENT TO CHARGE THE CELL PHONE. THIS DEVICE OUTPUTS 400MA. YOU MUST CHECK YOUR CELL PHONE MANUAL TO MAKE SURE THAT THE CHARGING CURRENT FOR YOUR CELL PHONE WILL CHARGE BELOW 400MA.
EXCALIBUR ELECTRONICS, INC. IS NOT RESPONSIBLE FOR ANY
DAMAGE TO YOUR CELL PHONE IF A DIFFERENT CHARGING
CURRENT IS REQUIRED.
