Excalibur electronic RD54 manual Using Your In-1 Classic Radio, When playing

Using Your

3-in-1 Classic Radio

Your 3-in-1/Classic Radio can tune into AM FM radio stations, play CDs, and it also lights up. First, unpack all parts and remove protective packing around unit. Then plug the cord into an electrical three prong outlet.

(RADIO/PHONO/CD) to PHONO, as

shown in Figure 2.

4. Select record speed-

33/45/78. See Figure 3.

5. Place

a record onto

the turntable

(use the

45 RPM

adapter

provided,

when playing

FIGURE 4:
Lift the tone
arm from the
arm-rest holder.	QUE-LEVER
Lift the QUE-LEVER
and move
the RECORD PLAYER-
ARM gently to the
desired position
over the record.
RECORD PLAYER-ARM

REMOVE SCREW

FIGURE 1: There is a

screw protecting the record players

cabinet. Remove

screw as shown above.

If this is not removed, you

will not be able to. play any records

To listen to the record player:

Follow these steps carefully: 1. There is a screw protecting the record players TURNTABLE. Remove screw as shown in Figure 1. If this is not removed, you will not be able to play any

records.

2. Turn the power on.

3. Slide the MODE switch

FIGURE /2: Slide/ the MODE switch

(RADIO PHONO CD) to PHONO.

FIGURE 3: Select			a single.)
record speed-
33/45/78.			6. Lift the
			RECORD
PLAYER-ARMfrom the arm-rest
holder. See Figure 6.
7. Lift	the	QUE-LEVER and
move the	RECORD PLAYER-ARM
gently to the desired position
over the record.
8. Lower the QUE-LEVER
slowly to meet the record’s sur-
face.	the	VOLUME control
9. Turn
knob clockwise to turn unit on.
Adjust the volume by turning
the VOLUME knob.
10. To stop the record, lift the
RECORD	PLAYER-ARM			away

from the surface of the record

TURNTABLE

8

and return it to its resting place.

9