Excell Precision XR2750 Risk To Fluid Injection, Risk Of Electrical Shock, Risk Of Hot Surfaces

HAZARD

RISK TO FLUID

INJECTION

WHAT CAN HAPPEN

•Your washer operates at fluid pressures and velocities high enough to penetrate human and animal flesh, which could result in amputation or other serious injury. Leaks caused by loose fittings or worn or damaged hoses can result in injection injuries. DO NOT TREAT FLUID INJECTION AS A SIMPLE CUT! See a physician immediately!

•Injuries can result if system pressure is not reduced before attempting maintenance or disassembly.

HOW TO PREVENT IT

•Never place hands in front of nozzle.

•Direct spray away from self and others.

•Make sure hose and fittings are tightened and in good condition. Never hold onto the hose or fittings during operation.

•Do not allow hose to contact muffler.

•Never attach or remove wand or hose fittings while system is pressurized.

•To relieve system pressure, shut off engine, turn off water supply, and pull gun trigger until water stops flowing.

•Use only hoses and accessories rated for pressure higher than your pressure washer's PSI.

HAZARD

RISK OF ELECTRICAL SHOCK

WHAT CAN HAPPEN

•Spray directed at electrical outlets or switches, or objects connected to an electrical circuit, could result in a fatal electrical shock.

HOW TO PREVENT IT

•Unplug any electrically operated product before attempting to clean it. Direct spray away from electric outlets and switches.

HAZARD

RISK OF HOT SURFACES

WHAT CAN HAPPEN

•Contact with hot surfaces, such as engines exhaust components, could result in serious burn.

HOW TO PREVENT IT

•During operation, touch only the control surfaces of the pressure washer. Keep children away from the pressure washer at all times. They may not be able to recognize the hazards of this product.

HAZARD

RISK OF INJURY OR PROPERTY DAMAGE WHEN TRANSPORTING OR STORING

WHAT CAN HAPPEN

•Fuel or oil can leak or spill and could result in fire or breathing hazard, serious injury or death can result. Fuel or oil leaks will damage carpet, paint or other surfaces in vehicles or trailers.

HOW TO PREVENT IT

•If pressure washer is equipped with a fuel shut-off valve, turn the valve to the off position before transporting to avoid fuel leaks. If pressure washer is not equipped with a fuel shut-off valve, drain the fuel from tank before transporting. Only transport fuel in an OSHA approved container. Always place pressure washer on a protective mat when transporting to protect against dam- age to vehicle from leaks. Remove pressure washer from vehicle immediately upon arrival at your destination.

A12338 4- ENG