![CARTON CONTENTS](/images/new-backgrounds/99010/9901011x1.webp)
CARTON CONTENTS
Engine Frame
and Wheel
Assembly
English/
Spanish
Operation
Manual
Engine
Manual
Nozzle
ChemicalNozzle
Cleaning
Hose Tool Holder Quick
Connect
Nozzles
Bagged Parts
| Spray Gun |
|
High Pressure | "Water Vroom" |
|
Surface Cleaning Guide |
| |
Hose | Quick Connect Spray Wand | Handle |
ASSEMBLY INSTRUCTIONS
1.Place the nozzle holder onto the panel (located on the handle assembly) and push each nozzle holder into place.
2.Remove five colored quick connect nozzles from plastic bag and insert them into correct grommet on the nozzle holder. NOTE: Nozzles are color coded to match colored nozzles on panel.
3.Place handle assembly onto frame, depress the snap buttons, and slide the handle assembly onto the frame until snap buttons snap into place.
5.To Assemble "Water Vroom" surface cleaning guide. NOTE: If not using the "Water Vroom" surface cleaning guide proceed to step 6.
a. Loosen knob | a |
(a) and rotate |
|
"J" hook (b) |
|
down and out |
|
of the way. |
|
b. Slide spray | b |
wand (c) |
|
| |
through |
|
| |
opening in |
|
surface |
|
cleaning |
|
guide. | c |
|
IMPORTANT: Make
sure nozzle is removed before assembling surface cleaning guide.
c. Adjust spray wand to desired height needed for job to be performed.
4.Attach high pressure hose to gun. Tighten securely.
A12338 | 6- ENG |