a. Ceramic plates
b.Adaptor
c.Lock ring
USING THE APPARATUS
Hair should be clean and dry when using the appliance.
Fitting accessories
1.Turn the lock ring (c) until the arrow on the handle (7) is aligned with the black arrow on the lock ring.
2.Insert crepe iron/hair straightener (12), the narrow hair straightener (4) or one of the curling irons (1) in the socket in the handle and press firmly into place.
3.Turn the lock ring until the arrow on the handle is aligned with that on the lock ring. The accessory is now locked in place.
Warming up
1.Place the appliance on a flat,
2.Switch on by pushing the on/off switch (8) towards the white symbol (above). The indicator lamp (10) will light and remain on as long as the appliance is on.
Setting the temperature
The appliance has three setting as indicated on the temperature scale (9):
o switched off (black symbol, botton)
o medium temperature
ohigh temperature (white symbol, top) Temperature can be regulated by pushing the on/off button up and down.
Using crepe-/flat iron
Use the adapter (b) to change accessories such as flat- or crepe irons.
oMake sure the crepe iron/hair straightener is switched off and push down the adaptor until
the arrow is aligned with the two straight lines – the accessory is now a hair straightener.
oPush the adapter up until the arrow is aligned with the two wavy lines – the accessory is
now a crepe iron.
oWhen the adapter is aligned with the dot in the middle the
Using the narrow hair straightener
The narrow hair straightener is used as a separate hair straightener without an adaptor. It is used for smaller locks than the crepe iron/hair straightener.
Using curling irons
There are three different sizes of curling iron: The thinnest gives tight curls and the thickest loose curls.
The larger the amount of hair treated at a time, the looser the curls will be.
You can also make curls softer using the brush accessory (2) and coil accessory (3) (see below).
Styling tips
Brush hair thoroughly before setting. Divide your hair up into small sections, and deal with them separately piece by piece as described below until the desired result is achieved.
Creped hair:
oStart with a lock of hair about 5 cm wide and close the crepe iron’s ceramic plates (a)
around the hair near the scalp.
oKeep the plates closed for approx. 10 seconds.
oOpen the plates and close them again further along the lock of hair.
Flat, smooth hair:
oStart with a lock of hair about 5 cm wide (4 cm wide when using the narrow hair straightener) and close the accesory’s
ceramic plates around the hair near the scalp.
oSlowly slide the apparatus towards the hair ends in a fluent movement. Keep the hair tight to avoid kinks. For more lift in the hair, smooth only the outer part of the hair lock.
Hair with a flick:
o Start with a lock of hair about 5 cm wide. Hold the curling iron so that the jaw is at the reverse side of the lock and close the jaw close to the scalp.
oSlide the apparatus slowly towards the hair ends.
oFinish by curling the last piece of hair a little out at the ends.
Hair with a curl:
o Start with a lock of hair about 5 cm wide. Hold the curling iron so that the jaw is at the front of the lock and close the jaw close to the scalp.
oSlide the apparatus slowly towards the hair ends.
oFinish by curling the last piece of hair under at the ends.
15
235027_IM.indd 15
