Servicing the Engine Oil, Checking the Oil Level

Maintenance

3.Remove the foam sleeve from the element.

4.Gently tap the pleated side of the paper element to dislodge dirt. Do Not wash the paper element or use pressurized air, as this will damage the element. Replace a dirty, bent, or damaged element. Handle new elements carefully; Do Not use if the rubber seal or foam sleeve is damaged.

5.Wash the foam sleeve in warm water and allow to dry. Reinstall over the paper element.

6.Clean all air cleaner components of any accumulated dirt or foreign material. Prevent any dirt from entering the carburetor.

7.Install the air cleaner element with the pleated side “out” and seat the rubber seal onto the edges of the air cleaner base.

8.Reinstall the air cleaner cover and secure with the knobs.

Servicing the Engine Oil

Checking the Oil Level

Service Interval: Before each use or daily

1.Park the machine on a level surface, disengage the blade control switch, stop the engine, engage parking brake, and remove the key.

2.Make sure the engine is stopped, level, and is cool so the oil has had time to drain into the sump.

3.To keep dirt, grass clippings, etc., out of the engine, clean the area around the oil fill cap/dipstick before removing it.

4.Pull and remove the oil fill cap/dipstick; wipe oil off. Reinsert the dipstick and push firmly into place (Figure 20).

Figure 20

1. Oil dipstick

3. Oil level

2.Filler tube

5.Remove the dipstick and check the oil level.

The oil level should be up to, but not over, the “F” mark on the dipstick.

6.If the level is low, add oil of the proper type, up to the “F” mark on the dipstick. Always check the level with the dipstick before adding more oil.

Note: To prevent extensive engine wear or damage, always maintain the proper oil level in the crankcase. Never operate the engine with the oil level below the “L” mark or over the “F” mark on the dipstick.

Changing the Oil and Filter

Service Interval: After the first 5 hours

Every 100 hours/Yearly (whichever comes first) thereafter.

Change the oil and filter while the engine is still warm. The oil will flow more freely and carry away more impurities. Make sure the engine is level when filling, checking, or changing the oil.

1.Start the engine and let it run until warm. This warms the oil so it drains better.

2.Disengage the blade control switch and move the motion controls outward to the neutral position and engage parking brake.

4500-450 specifications

The Exmark 4500-450 is a top-tier commercial-grade zero-turn mower that has gained immense popularity among landscaping professionals for its advanced features, superior performance, and durability. Designed to tackle the toughest mowing tasks, the 4500-450 stands out for its reliability and innovative technologies.

One of the defining characteristics of the Exmark 4500-450 is its powerful engine. Equipped with a robust Kohler or Kawasaki engine, this model delivers impressive horsepower, ensuring that it can handle even the most demanding terrains with ease. This power allows for efficient cutting, enabling users to complete jobs more quickly without sacrificing quality.

The Exmark 4500-450 features a commercial-grade cutting deck that is fully adjustable to provide a clean and professional-looking cut. Its cutting width can range from 48 to 60 inches, making it versatile enough to handle various lawn sizes and types. The deck is designed with a unique airflow management system that optimizes grass lift, ensuring even and consistent results.

One of the standout technologies in the Exmark 4500-450 is its patented UltraCut deck design. This innovative feature promotes superior cutting performance while reducing clumping and providing a finer mulching capability. Additionally, the deck is designed for easy cleaning, which helps maintain the mower’s performance over time.

Comfort and usability are top priorities for the Exmark 4500-450. It boasts an ergonomic seat with high back support, reducing operator fatigue during long mowing sessions. The intuitive control system allows for smooth maneuverability, even in tight spaces, making it ideal for commercial landscaping work.

Moreover, the Exmark 4500-450 is built with durability in mind. Constructed from high-quality materials, it is designed to withstand the rigors of daily use. Its heavy-duty frame and components contribute to its long lifespan, ensuring that it remains a reliable workhorse for years to come.

In conclusion, the Exmark 4500-450 is an exceptional choice for professionals seeking a powerful, efficient, and durable zero-turn mower. With its high-performance engine, innovative cutting technologies, and user-friendly features, it sets a standard in commercial landscaping equipment, delivering results that exceed expectations while making the mowing process as efficient and comfortable as possible.

Exmark 4500-450 Servicing the Engine Oil, Checking the Oil Level, Changing the Oil and Filter

Models: 4500-450