ECS Upper Handle and Controls (continued)
Ref. | Part Number | Qty. | Description |
1 | 116-4079 | 1 | Wld, Lever, Opc (LH) ▲ |
2 | 1-303365 | 2 | Bushing-Nylon |
3 | 1-803322 | 2 | Setscrew-5/16-24 X 5/16 ■ |
4 | 103-0769-03 | 1 | Wld, Opc Axle Lever |
5 | 1-303363 | 1 | Spring-Extension |
6 | 1-303335 | 1 | Tie-Cable 7 15/16 (Large) |
7 | 1-807513 | 2 | Bolt-Carriage #10-24 X 1/2 |
8 | 3296-2 | 2 | Nut-Nyloc #10-24 |
9 | 116-2426 | 1 | Cable, Throttle |
10 | 116-4080 | 1 | Wld, Opc Lever (RH) ▲ |
11 | 1-303020 | 1 | Grip-Lever |
12 | 103-1629 | 1 | Lever, Clutch W/Grip |
13 | 3296-29 | 2 | Nut-Nyloc 5/16-18 |
14 | 3256-4 | 1 | Washer-3/8 Std |
15 | 103-0027 | 2 | Bushing-Lever, Drive |
16 | 1-806003 | 2 | Hairpin-Cotter |
17 | 103-1627 | 1 | Linkage, Upper |
18 | 103-1604 | 2 | Linkage, Wheel Drive |
19 | 1-543296 | 1 | Grommet |
20 | 103-0815 | 2 | Grip-Bar, Handle |
21 | 1-303435 | 6 | Washer-Spring Disc 1/4 |
22 | 103-1631 | 1 | Latch, Thumb (LH) (Not |
22 | 103-1630 | 1 | Shown) ● |
Latch, Thumb (RH) |
23 | 3296-42 | 1 | Nut-Nyloc 1/4-20 |
24 | 103-0770-03 | 1 | Wld, Handle |
25 | 1-303088 | 1 | Clip-Cable |
26 | 323-6 | 4 | Screw-HH 3/8-16 X 1 |
35 | 103-0498 | 1 | Nut-Ignition |
39 | 33094-00 | 1 | Washer |
41 | 116-2661 | 1 | Harness-Wire |
42 | 3256-22 | 1 | Washer-1/4 Sae |
43 | 321-4 | 1 | Screw-HH 1/4-20 X 3/4 |
44 | 1-403121 | 1 | Switch-Key |
Ref. | Part Number | Qty. | Description |
44:1 | 1-603511 | 1 | Key-Ignition |
44:2 | 103-2106 | 1 | Key-Exmark Logo |
45 | 1-633181 | 1 | Plate-Tapped |
46 | 3296-39 | 5 | Nut-Nyloc 3/8-16 |
47 | 3290-500 | 2 | Screw-PPH #10-24 X 5/8 |
48 | 1-513051 | 1 | Switch-N.O. |
49 | 1-323229 | 1 | Clip-Loom 3/8 |
50 | 1-303287 | 6 | Tie-Cable 5 1/2 (Small) |
51 | 1-323430 | 1 | Module-Interlock |
52 | 323-14 | 1 | Screw-HH 3/8-16 X 3 |
53 | 322-9 | 2 | Screw-HH 5/16-18 X 1 3/4 |
54 | 1-413152 | 4 | Bushing-Sleeve |
55 | 116-4081 | 1 | Lever, Drive LH |
56 | 3219-3 | 2 | Nut-Hex 3/8-24 |
57 | 321-14 | 2 | Screw-HH 1/4-20 X 2 3/4 |
58 | 32128-33 | 12 | Nut-Whizlock 1/4-20 |
59 | 103-0464 | 2 | Pin-Spring 1/8 X 1/2 |
60 | 3256-22 | 10 | Washer-1/4 Sae |
61 | 103-0235 | 2 | Screw-HH 1/4-20 X 1 1/8 |
| | | W/Nylon ■ |
62 | 116-4082 | 1 | Lever, Drive RH |
63 | 3220-3 | 4 | Nut-Jam 3/8-24 |
64 | 109-4934 | 1 | Asm, Console |
65 | 321-3 | 10 | (109-4649-03) W/Decals |
Screw-HH 1/4-20 X 5/8 |
66 | 103-2513 | 1 | Asm, Drive Lever RH |
67 | 103-2514 | 1 | Asm, Drive Lever LH |
68 | 103-2463 | 2 | Balljoint |
69 | 103-0489-03 | 1 | Bracket, Opc Axle |
70 | 103-1796 | 1 | Cable-Choke |
71 | 103-1797-01 | 1 | Bracket-Cable, Choke |
72 | 1-633080 | 1 | Spacer |
73 | 3256-14 | 1 | Washer-#10 Std |
75 | 33114-016 | 1 | Screw-HH M8-1.25 X 16Mm |
●Not illustrated
■Use Pro-Lock, Nut Type (P/N 1-840022, .5ml tube) on threads.
▲Use Pro-Lock retaining type, Part no. 1-840023 (.5cc tube) on inside of bore of OPC hub.
