Exmark manual Specifications, Assembly Instructions, MODEL NUMBER CD42CD CD48CD 2.2 DIMENSIONS

2.SPECIFICATIONS

2.1MODEL NUMBER: CD42CD; CD48CD

2.2DIMENSIONS

	42” Deck	48” Deck
Overall Width	43.2” (109.7 cm)	49.2” (125.0 cm)
Overall Height	13.1” (33.3 cm)	13.1 (33.3 cm)
Overall Length	37.2” (94.4 cm)	39.9” (101.3 cm)
Weight	295 lbs. (134 kg)	325 lbs. (147 kg)

2.3 TORQUE REQUIREMENTS

Bolt Location	Torque
Blade Mounting Bolt	85-110 ft-lbs. (115-149	N-m)
Gearbox Mounting Bolts	30-35 ft-lbs. (41-47	N-m)
Gearbox Assembly Bolts	50-55 ft-lbs. (68-75	N-m)

3.ASSEMBLY INSTRUCTIONS

3.1UNCRATE DECK

a)Remove flat hairpins from under front frame and discard. See Figure 1.

3.2ASSEMBLE DISCHARGE CHUTE

a)Locate the 3 holes at the rear of the mower deck shown in Figure 1 and remove the 3 #10-24 x 3/4 truss head screws and 3 #10-24 nyloc nuts.

b)Assemble the discharge tube to the mower deck as shown using the hardware removed in 3.2.1., with hinge positioned on top of mower deck.

c)Locate the discharge tube spring on the mower deck and hook onto the discharge tube spring bracket. See Figure 1.

FIGURE 1

DISCHARGE TUBE ASSEMBLY

3.3ASSEMBLE DECK TO NAVIGATOR

a)Stop engine, wait for all moving parts to stop and remove key.

b)Roll the mower deck up to the Navigator tractor with the discharge tube down, making sure the deck springs are located above the drive wheel and below the console on each side.

4