Exmark Metro 21, Metro 26 manual Paper Air Filter Foam Pre Cleaner

Paper Air Filter

Foam Pre Cleaner

G0216

Figure 17

NOTE: Do not try to clean a paper air filter.

6.Remove the foam pre-cleaner and wash it with a mild detergent and water, then blot it dry (Fig 17).

7.Saturate the pre-cleaner with clean engine oil, then squeeze it (do not twist) to remove the excess oil.

8.Install the foam pre-cleaner.

9.Install the new paper air filter.

10.Install the cover and secure it with the screw.

5.6Maintaining the Blade

Always mow with a sharp blade. A sharp blade cuts cleanly and without tearing or shredding the grass blades.

1.Stop the engine and wait for all moving parts to stop.

2.Disconnect the wire from the spark plug (Fig. 8).

3.Drain the gasoline from the fuel tank.

4.Tip the lawn mower onto its right side (Fig. 18).

FIGURE 18

5.Inspect the Blade for sharpness and wear, especially where the flat and the curved parts meet (Fig. 19A. Because sand and abrasive material can wear away the metal that connects the flat and curved parts of the blade, check the blade before using the lawn mower. If you notice a slot or wear (Fig. 19B and 19C), replace the blade.

- 21 -