Exmark Metro 26 manual Model Number, Engine, Fuel System, Transmission, Deck, Dimensions, Controls

2. SPECIFICATIONS

2.1	MODEL NUMBER:
	For Serial Nos. 561,194 through 599,999; M266KASPC
	For Serial Nos. 600,000 and Higher; MS6KA26B
2.2	ENGINE
	2.2.1	Engine Specifications: See your engine owner's manual.
	2.2.2	RPM (No Load): 3600 rpm
2.3	FUEL SYSTEM
	2.3.1	Capacity: 4 qt.		(3.8 liter)
	2.3.2	Type of Fuel: Use only clean, fresh, regular grade, unleaded gasoline with the
			pump sticker octane rating of 87 or higher. In countries using the research
			method, it should be 90 octane minimum.
	2.3.3	Fuel Filter: Non–replaceable, on left side of tank.
	2.3.4	Fuel Shut Off Valve: in fuel line between tank and engine.
2.4	TRANSMISSION
	2.4.1	3 speeds forward
		Speed range:		1st	- 2.0 mph (3.2 km/h)
				2nd	- 2.9 mph (4.6 km/h)
				3rd	- 4.1 mph (6.6 km/h)
2.5	DECK
	2.5.1 Cutting Width: 26.1” (66 cm)
	2.5.2 Blade Brake: When the blade engagement control is moved to the disengaged
			position a friction brake pad stops the rotation of the blades.
	2.5.3 Cutting Height: Adjusts in 1/2" (.64 cm) increments from 1” to 4”
			(2.5 cm-10.6 cm).
2.6	DIMENSIONS
	2.6.1 Overall Width: 27” (69 cm)
	2.6.2 Overall Length and Height (Adjustable):
			Handle Setting			Length	Height
			High			69” (175.2 cm)	44” (111.8 cm)
			Low			73” (185.4 cm)	37.5” (95.3 cm)

2.6.3 Curb Weight: 160 lbs (73 kg)

3. OPERATION INSTRUCTIONS

NOTE: Determine the left and right sides of the machine from the normal operating position.

3.1CONTROLS

3.1.1Familiarize yourself with the controls and operation of the unit.

Carefully read the following information about the controls and their operation.

3.1.2Blade Control Bail:

Located on the upper handle as shown in Figure 1. When the blade control bail is depressed, the system senses that the operator is in the normal operator's position.

When the blade control bail is released, the system senses that the operator has moved from the normal operating position and will stop the blade.

9