Exmark manual Installing OCD01 to the Mower Deck

3.2INSTALLING OCD01 TO THE MOWER DECK

3.2.1Remove discharge chute from deck.

For UltraCut Decks: Remove and discard discharge chute and hardware. Decks with serial numbers 669,999 and lower require a flexible discharge chute, kit # 109-3860. The kit is not supplied with the OCD01 accessory and needs to be purchased separately.

For Triton Decks: Remove and retain the discharge chute and hardware.

3.2.2Use Figure 2 to locate the correct mounting holes on the pedal pivot bracket.

FIGURE 2

3.2.3Install the foot pedal on the pedal pivot bracket. The upper screw, 5/16-18 x 3/4 (item 4) installs from the bottom of the pedal pivot bracket as shown in Figure 3. Fasten with whizlock nut (item 7).

FIGURE 3

3.2.4The lower screw installs from the top down as shown in Figure 4. Fasten with whizlock

nut (item 7).

FIGURE 4

5