Exmark TT23KAEP Transporting a Unit, If necessary, use assistance when loading, Operation

Operation

Figure 7

For cutting heights above 3.5 inches (38 mm) use the bottom hole. The rollers will still be effective against scalping.

1. Anti-scalp roller	2. Cutting height
mounting bracket

7.Four types of anti-scalp roller assemblies are available. See Figure 8 to determine which assembly has been installed on the unit. Torque hardware as specified, or loss of roller may result. See Figure 8.

Figure 8

Front left anti-scalp bracket shown

1.Type 1 hardware

2.Type 2 hardware

3.Type 3 hardware

4.Type 4 hardware

5.(Type 1) 3/8–16 x 4 hex screw

6.(Type 2 & 3) 3/8–24 x 2 hex screw — Torque to 50–55 ft-lb (68–75 N-m)

7.(Type 4) 3/8 whizlock nut — Torque to 30–35 ft-lb (41– 47 N-m)

8.Spring disc washer (cone towards bolt head)

9.(Type 1) 3/8 whizlock nut and heavy flat washer — Torque to 40–45 ft-lb (54–61 N-m)

10.(Type 2) 3/8 nyloc nut and heavy flat washer — Torque to 30–35 ft-lb (41–47 N-m)

11.(Type 3) 3/8 flanged nyloc nut without washer — Torque to 30–35 ft-lb (41– 47 N-m)

12.(Type 4) 3/8 nyloc nut —Torque to 30–35 ft-lb

(41– 47 N-m).

Transporting

Transporting a Unit

WARNING

Loading the mower onto a trailer without strong enough or properly supported ramps could be dangerous. The ramps could collapse causing the unit to fall, which could cause injury.

•Use proper ramps that are secured to the truck or trailer.

•Keep feet and legs out from under the unit when loading and unloading.

•If necessary, use assistance when loading.

Be sure the fuel shut-off valve is closed.

Use a heavy duty trailer to transport the machine. Engage neutral lock latches and park brake, then block wheels.

Securely fasten the machine to the trailer with straps, chains, cables, or ropes.

Do Not rely solely on the parking brake to hold the machine on the trailer.

Be sure that the trailer has all necessary lighting and marking as required by law and use a safety chain.

20