Extreme Networks 15101 Summit X250e-24xDC, All Summit X250e Series, Regulatory/Safety Standards

Technical Specifications

Extreme Networks Data Sheet

Summit X250e-24xDC

General Specifications

Performance

•48.8 Gbps switch fabric bandwidth

•36.3 Mpps frame forwarding rate

•9,216 Byte maximum packet size (Jumbo Frame)

•128 load sharing trunks, up to 8 members per trunk

•8 QoS queues/port

•4,094 VLANs (Port, Protocol, IEEE 802.1Q)

•1,024 centralized ACL rules per switch

Forwarding Tables

•Layer 2/MAC Addresses: 8K

•IPv4 LPM Entries: 512

•IPv6 LPM Entries: 256

Rate Limiting

•Ingress bandwidth policing/rate limiting per flow

•Egress bandwidth rate shaping per egress queue and per port

•Rate Limiting Granularity: 64Kbps

•Available Rate Limiters: 1,024 per switch

Indicators

•Per port status LED

•System Status LEDs: management, fan and power

Ports

•24 ports 100BASE-X supporting 100BASE-X SFP Optical Transceivers

•2 ports Gigabit Ethernet (100/1000BASE-X SFP, shared PHY with 2 10/100/1000BASE-T ports)

•2 SummitStack stacking interfaces

•1 port Serial (control port)

•1 10/100BASE-T out-of-band management port

External Power Supply Support

• EPS-150DC with EPS-T2

Physical Specifications

Dimensions and Weight

•Height: 1.73 Inches/4.4 Cm

•Width: 17.35 Inches/44.1 Cm

•Depth: 12.13 Inches/30.8 Cm

•Weight: 9.97 Lbs/ 4.53 Kg

Operating Specifications

Power & Acoustic Sound

•Voltage Input Range: -40 to -72VDC

•Input Current Rating: 2.0A at -48VDC

•Input Current: 1.25A @ -40VDC, 0.75A @ -72VDC

•Maximum In-Rush Current: 20A@-48VDC, 30A@-72VDC

•Efficiency: 83%

•Power Supply Input Socket: TYCO 206061-1

•Power Cord Input Plug: TYCO 206060-1

•Heat Dissipation: 42W (143.3 BTU/h)

•Power Consumption: 47W (160.4 BTU/h)

•Acoustic Noise (Low FAN Speed): 37 dBA per ISO 7779

•Acoustic Noise (High FAN Speed): 47 dBA per ISO 7779

All Summit X250e Series

Regulatory/Safety Standards

North American Safety of ITE

•UL 60950-1 1st Ed., Listed Device (U.S.)

•CSA 22.2#60950-1-03 1st Ed. (Canada)

•Complies with FCC 21CFR 1040.10 (U.S. Laser Safety)

•CDRH Letter of Approval (U.S. FDA Approval)

European Safety of ITE

•EN60950-1:2001+A11

•EN 60825-1+A2:2001 (Lasers Safety)

•TUV-R GS Mark by German Notified Body

•2006/95/EC Low Voltage Directive

International Safety of ITE

•CB Report & Certificate per IEC

60950-1:2001 + National Differences

•AS/NZS 60950-1 (Australia/New Zealand)

EMI/EMC Standards

North America EMC for ITE

•FCC CFR 47 part 15 Class A (U.S.)

•ICES-003 Class A (Canada) European EMC Standards

•EN 55022:2003 Class A

•EN 55024:A2-2003 Class A includes IEC 61000-4-2, 3, 4, 5, 6, 11

•EN 61000-3-2,2006 (Harmonics)

•EN 61000-3-3 1995+A1:2001 (Flicker)

•ETSI EN 300 386 v1.3.3, 2005-04 (EMC Telecommunications)

•2004/108/EC EMC Directive

International EMC Certifications

•CISPR 22: 2005, Class A (International Emissions)

•CISPR 24:A2:2003 Class A (International Immunity)

•IEC/EN 61000-4-2:2001 Electrostatic Discharge, 8kV Contact, 15 kV Air, Criteria A

•EC/EN 61000-4-3:2002 Radiated Immunity 10V/m, Criteria A

•EC/EN 61000-4-4:2004 Transient Burst,

1kV, Criteria A

•IEC/EN 61000-4-5:2001 Surge, 2 kV L-L,

2kV L-G, Level 3, Criteria A

•IEC/EN 61000-4-6:2004 Conducted Immunity, 0.15-80 MHz, 10V/m unmod. RMS, Criteria A

•EC/EN 61000-4-11:2004 Power Dips & Interruptions, >30%, 25 periods, Criteria C

Country Specific

•VCCI Class A (Japan Emissions)

•ACMA (C-Tick) (Australia Emissions)

•KCC Mark EMC Approval (Korea)

Telecom Standards

•EN/ETSI 300 386:2001 (EMC Telecommunications)

•EN/ETSI 300 019 (Environmental for Telecommunications)

•MEF9 and MEF14 certified for EPL, EVPL and ELAN

•NEBS Level 3 compliant to portions of GR-1089 Issue 4 & GR-63 Issue 3 as defined in SR3580 with exception to filter requirement

IEEE 802.3 Media Access Standards

•IEEE 802.3 10BASE-T

•IEEE 802.3u 100BASE-TX

•IEEE 802.3ab 1000BASE-T

•IEEE 802.3z 1000BASE-X

Environmental Standards

•EN/ETSI 300 019-2-1 v2.1.2 (2000-09) - Class 1.2 Storage

•EN/ETSI 300 019-2-2 v2.1.2 (1999-09) - Class 2.3 Transportation

•EN/ETSI 300 019-2-3 v2.1.2 (2003-04) - Class 3.1e Operational

•EN/ETSI 300 753 (1997-10) – Acoustic Noise

•ASTM D3580 Random Vibration Unpackaged 1.5G

Operating Specifications

Temperature

•Operating Temperature Range: 0° C to 40° C (32° F to 104° F)

•Operating Humidity: 10% to 93% relative humidity, non-condensing

•Operational Shock (Half Sine): 30 m/s2 (3g), 11ms, 60 Shocks

•Operational Random Vibration: 5 – 500 Hz @ 1.5g rms

Storage & Transportation Conditions (Packaged)

•Transportation Temperature:

-40° C to 70° C (- 40° F to 158° F)

•Storage and Transportation Humidity: 10% to 95% RH, non-condensing

•Packaged Shock (Half Sine):

180 m/s2 (18g), 6ms, 600 shocks

•Packaged Sine Vibration:

5 – 62 Hz @ Velocity 5mm/s,

62 – 500 Hz @ 0.2 G

•Packaged Random Vibration:

5 – 20 Hz @ 1.0 ASD w/-3dB/oct. from 20 – 200 Hz

•14 drops min on sides & corners @ 42” (<15kg box)

Warranty

•Ltd. Lifetime with express Advanced Hardware Replacement (for products shipped from Extreme Networks on or after June 29, 2009)

•For warranty details, visit www.extremenetworks.com/go/warranty

© 2010 Extreme Networks, Inc. All rights reserved. Summit X250e Series—Page 12