HDMI 101 Plus • Setup Guide
Overview
The Extron HDMI 101 Plus is a cable equalizer that extends HDMI signals up to 250 feet (76 m) at resolutions up to 1080p or 1920x1200. This setup guide provides instructions for a basic installation by an experienced installer. For complete instructions, see the HDMI 101 Plus User Guide, which is available on the Extron web site (www.extron.com).
Front Panel
2
APower and signal status LED — lights amber when power is connected, lights green when there is an active HDMI signal
B HDMI input
1
HDMI INPUT
Rear Panel |
|
|
| 3 |
C HDMI output |
|
|
| |
|
|
|
| |
D Power input — Connect the 12 VDC, 1 A | POWER | HDMI 101 Plus | ||
power supply to this power input. | 12V |
|
|
|
0.2A MAX |
|
Alternatively, the HDMI 101 Plus can draw | 4 |
power from the source device over the HDMI | HDMI OUTPUT |
cable but this reduces the maximum cable |
|
length (see the table on the next page). |
|
Installation
1. | Place the HDMI 101 Plus at |
| the end of a long cable run |
| from the source device and |
| close to the output device. |
2. | Connect the source device to |
Long HDMI Cable 250' (76 m) Max.
the input of the equalizer. |
See the table below for the |
maximum cable distances. |
3. Connect the display device to |
the output of the equalizer. |
This cable should be a |
maximum of 15 feet (5 m). |
POWERX | |
12V | MA |
0.4A |
|
Extron
HDMI 101 Plus
DVD with HDMI Equalizer Output
Plus 101
HDMI
OUTPUT
HDMI
Short HDMI Cable 15' (5 m) Max.
Display
NOTE: Use the LockIt™ HDMI lacing brackets provided to secure the HDMI |
connectors (see the LockIt HDMI Lacing Bracket Installation Guide at |
www.extron.com). |